Features: • DVB-C EN300429 and ITU-T J.83 annex A/C compliant QAM demodulator• Conventional IF and low IF input supported• QAM constellations 16, 32, 64, 128 and 256• Symbol rates up to 9 MBaud• Blind acquisition of all symbol rates• Blind acquisition of QAM con...
ZL10210: Features: • DVB-C EN300429 and ITU-T J.83 annex A/C compliant QAM demodulator• Conventional IF and low IF input supported• QAM constellations 16, 32, 64, 128 and 256• Symbol ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Parameter | Symbol | Min. | Max. | Unit |
Power supply | VDD | -0.3 | 4.5 | V |
CVDD | -0.3 | 2.3 | ||
Voltage on input pins (5 V rated) | VI | -0.3 | 5.5 | V |
Voltage on input pins (3.3 V rated) | VI | -0.3 | 6.5 | V |
Voltage on input pins (1.8 V rated, e.g., XTI) | VI | -0.3 | CVdd + 0.3 | V |
Voltage on output pins (5 V rated) | VO | -0.3 | 5.5 | V |
Voltage on output pins (3.3 V rated) | VO | -0.3 | VDD + 0.3 | V |
Voltage on output pins (1.8 V rated, e.g., XTO) | VO | -0.3 | CVdd + 0.3 | V |
Storage temperature | TSTG | -55 | 150 | |
Operating ambient temperature | TOP | -40 | 85 | |
Junction temperature | TJ | 125 | ||
ESD protection (human body model) | 4 | kV |
Note 1: Stresses exceeding these listed under 'Absolute Ratings' may induce failure. Exposure to absolute maximum ratings for extended periods may reduce reliability. Functionality at or above these conditions is not implied.
The ZL10210 is a DVB-C and ITU-T annex A/C QAM demodulator. This low power cable demodulator includes standard Zarlink features of auto signal acquisition, fast blind-scan capability, software/hardware power down, RF level, BER and SNR detection. The ZL10210 represents the latest in QAM demodulation for DVB cable. Together with a cable tuner, a full digital cable receiver front-end can be realized. Either conventional intermediate frequencies such as 36 or 44 MHz or low intermediate frequencies can be used - see application below. The ZL10210 requires only a single channel filter bandwidth of 8 MHz nominal for full DVB and ITU-T annex A/C performance. The low power consumption, small package form factor and integrated software/hardware power-down modes help reduce the system BoM (bill of materials) in cost sensitive applications. The device is packaged in a 7 x 7 mm 64-pin LQFP.