X24C08

Features:

• 2.7V to 5.5V Power Supply
• Low Power CMOS
-Active Read Current Less Than 1 mA
-Active Write Current Less Than 3 mA
-Standby Current Less Than 50 mA
• Internally Organized 1024 x 8
• 2 Wire Serial Interface
-Bidirectional Data Transfer Protocol
• Sixteen Byte Page Write Mode
-Minimizes Total Write Time Per Byte
• Self Timed Write Cycle
-Typical Write Cycle Time of 5 ms
• High Reliability
-Endurance: 100,000 Cycles
-Data Retention: 100 Years
• 8 Pin Mini-DlP, 8 Pin SOIC and 14 Pin SOIC Packages


Pinout




Specifications

Temperature Under Bias ................. 65°C to +135°C
Storage Temperature ...................... 65°C to +150°C
Voltage on any Pin with
Respect to VSS .......................................1.0V to +7V
D.C. Output Current ........................................... 5 mA
Lead Temperature
(Soldering, 10 Seconds) ................................... 300°C
*COMMENT
Stresses above those listed under "Absolute Maximum
Ratings" may cause permanent damage to the device.
This is a stress rating only and the functional operation of
the device at these or any other conditions above those
indicated in the operational sections of this specification is
not implied. Exposure to absolute maximum rating conditions
for extended periods may affect device reliability.


Description

The X24C08 is a CMOS 8,192 bit serial E2PROM, internally organized 1024 x 8. The X24C08 features a serial interface and software protocol allowing operation on a simple two wire bus.

The X24C08 is fabricated with Xicor's advanced CMOS Textured Poly Floating Gate Technology.

The X24C08 utilizes Xicor's proprietary Direct Write™ cell providing a minimum endurance of 100,000 cycles and a minimum data retention of 100 years.