Features: • Single 3.3-volt operations − 3.3-volt Read − 3.3-volt Erase − 3.3-volt Program• Fast Program operation: − Byte-by-Byte programming: 50 S (max.)• Fast Erase operation: − Chip Erase cycle time: 100 mS (max.) − Sector Erase cycle time:...
W39L040: Features: • Single 3.3-volt operations − 3.3-volt Read − 3.3-volt Erase − 3.3-volt Program• Fast Program operation: − Byte-by-Byte programming: 50 S (max.)•...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
PARAMETER | RATING | UNIT |
Power Supply Voltage to Vss Potential | -2.0 to +4.6 | V |
Operating Temperature | 0 to +70 | °C |
-40 to +85 | °C | |
Storage Temperature | -65 to +150 | °C |
Voltage on Any Pin to Ground Potential | -2.0 to +4.6 | V |
Voltage on A9 and OE Pin to Ground Potential | -2.0 to +13.0 | V |
The W39L040 is a 4Mbit, 3.3-volt only CMOS flash memory organized as 512K × 8 bits. For flexible erase capability, the 4Mbits of data are divided into 8 uniform sectors of 64 Kbytes, which are composed of 16 smaller even pages with 4 Kbytes. The byte-wide (× 8) data appears on DQ7 − DQ0. The device can be programmed and erased in-system with a standard 3.3V power supply. A 12-volt VPP is not required. The unique cell architecture of the W39L040 results in fast program/erase operations with extremely low current consumption (compared to other comparable 3.3-volt flash memory products). The device can also be programmed and erased by using standard EPROM programmers