Features: · Single 5-volt program and erase operations· Fast page-write operations - 128 bytes per page - Page program cycle: 10 mS (max.) - Effective byte-program cycle time: 39 mS - Optional software-protected data write· Fast chip-erase operation: 50 mS· Read access time: 90 nS· Typical page pr...
W29C512A: Features: · Single 5-volt program and erase operations· Fast page-write operations - 128 bytes per page - Page program cycle: 10 mS (max.) - Effective byte-program cycle time: 39 mS - Optional softw...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
PARAMETER | RATING | UNIT |
Power Supply Voltage to Vss Potential | -0.5 to +7.0 | V |
Operating Temperature | 0 to +70 | °C |
Storage Temperature | -65 to +150 | °C |
D.C. Voltage on Any Pin to Ground Potential Except A9 | -0.5 to VDD +1.0 | V |
Transient Voltage (<20 nS ) on Any Pin to Ground Potential | -1.0 to VDD +1.0 | V |
Voltage on A9 and OE Pin to Ground Potential | -0.5 to 12.5 | V |
The W29C512A is a 512K bit, 5-volt only CMOS flash memory organized as 64K ´ 8 bits. The device can be programmed and erased in-system with a standard 5V power supply. A 12-volt VPP is not required. The unique cell architecture of the W29C512A results in fast program/erase operations with extremely low current consumption (compared to other comparable 5-volt flash memory products). The device can also be programmed and erased using standard EPROM programmers.