Features: · Single 5 -volt write (erase and program) operations· Fast page -write operations - 128 bytes per page - Page write (erase/program) cycle: 10 mS (max.) - Effective byte -write (erase/program) cycle time: 39 mS -Optional software -protected data write· Fast chip -erase operation: 50 mS· ...
W29C020C: Features: · Single 5 -volt write (erase and program) operations· Fast page -write operations - 128 bytes per page - Page write (erase/program) cycle: 10 mS (max.) - Effective byte -write (erase/prog...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
PARAMETER | RATING | UNIT |
Power Supply Voltage to Vss Potential | -0.5 to +7.0 | V |
Operating Temperature | 0 to +70 | °C |
Storage Temperature | -65 to +150 | °C |
D.C. Voltage on Any Pin to Ground Potential Except A9 | -0.5 to VDD +1.0 | V |
Transient Voltage (<20 nS ) on Any Pin to Ground Potential | -1.0 to VDD +1.0 | V |
Voltage on A9 and OE Pin to Ground Potential | -0.5 to 12.5 | V |
The W29C020C is a 2-megabit, 5-volt only CMOS flash memory organized as 256K ´ 8 bits. The device can be written (erased and programmed) in-system with a standard 5V power supply. A 12-volt VPP is not required. The unique cell architecture of the W29C020C results in fast write (erase/program) operations with extremely low current consumption compared to other comparable 5- volt flash memory products. The device can also be written (erased and programmed) by using standard EPROM programmers.