USB97CFDC2-01

Operating Temperature Range....................................................................... 0 to +70
Storage Temperature Range ..................................................................     -55⁰to +150
Lead Temperature Range (soldering, 10 seconds) ................................................... +325
Positive Voltage on any pin, with respect to Ground (Note 1) .............................Vcc+0.3V
Negative Voltage on any pin, with respect to Ground...................................................-0.3
Maximum Vcc..............................................................................................................+3.6V
Note 1: Maximum voltage on all I type Inputs and the IS inputs, OD12 and OD24 outputs for floppy disk drive interface is 5.25V
*Stresses above the specified parameters could cause permanent damage to the device. This is a stress rating only and functional operation of the device at any other condition above those indicated in the operation sections of this
specification is not implied.
Note 2: When powering this device from laboratory or system power supplies, it is important that the Absolute  ximum Ratings not be exceeded or device failure can result. Some power supplies exhibit voltage spikes on their outputs when the AC power is switched on or off. In addition, voltage transients on the AC power line may appear on the DC output.
When this possibility exists, it is suggested that a clamp circuit be used.

The USB97CFDC2-01 is an integration of an Enhanced Multi-Endpoint USB 1.1 Peripheral Controller, a 32K Byte Program ROM, and the SMSC Floppy Disk Controller used in many of its Super IO products, such as the FDC37C869. Special care in the design has been taken to assure the lowest possible system current draw (<250A) during SUSPEND mode operation.

Provisions for external program Flash Memory up to 32K bytes for program storage is provided for customized applications.

Several pins of the USB97CFDC2-01 are provided for controlling external power control elements and sensing specialized drive functions.

Individual manufacturers of the USB97CFDC2-01 may provide their unique USB vendor and product IDs and descriptor strings via an external 3 wire serial EEPROM. Up to 16 different configuration options for various drive related parameters are provided by 4 external configuration input pins which can be read at power-on reset.