Features: Speech part· Driver for the line interrupter that can be either a PMOST when UBA1702 is used or a PNP when UBA1702A is used· Adjustable over-current protection· Adjustable over-voltage protection for transmission circuit· Adjustable mute (dialling mode voltage; DMO or NSA)· Adjustable cu...
UBA1702A: Features: Speech part· Driver for the line interrupter that can be either a PMOST when UBA1702 is used or a PNP when UBA1702A is used· Adjustable over-current protection· Adjustable over-voltage pro...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Speech part
· Driver for the line interrupter that can be either a PMOST when UBA1702 is used or a PNP when UBA1702A is used
· Adjustable over-current protection
· Adjustable over-voltage protection for transmission circuit
· Adjustable mute (dialling mode voltage; DMO or NSA)
· Adjustable current loop detection (hook switch status)
· Microcontroller supply
· Provision for electronic hook switch.
Ringer part
· Over-voltage protection
· Ringer frequency output for frequency discrimination
· Adjustable ringer threshold for piezo-driver enable
· Three bits ringer volume control
· Bridge-tied-load (BTL) output stage for piezo transducer
· Fast start-up microcontroller supply.
Miscellaneous
· Separated ground pins for transmission circuit interface and control signals (e.g. for TEA1064A)
· Possibility to supply the microcontroller with an external voltage source.
SYMBOL |
PARAMETER |
CONDITIONS |
MIN. |
MAX. |
UNIT |
VSDI,VSDO | maximum input/output switch driver voltage (pins SDI or SDO) |
DC; note 1 |
- |
240 |
V |
pulsed; note 2 |
- |
400 |
V | ||
VEHI | maximum hook switch input voltage (pin EHI) | DC; note 1 |
- |
240 |
V |
pulsed; note 2 |
- |
400 |
V | ||
Vi(max) | maximum voltage at all logic inputs (pins DPI, MSI, RV0, RV1, RV2 and RMI) |
VSS-0.4 |
VDD+0.4 |
V | |
Vn(max) | maximum voltage at all other pins |
- |
24 |
V | |
ISPI(max) | maximum speech part input current (pin SPI) |
- |
150 |
mA | |
IRPI(max) | maximum ringer part input current (pin RPI) |
- |
70 |
mA | |
Ptot | total power dissipation UBA1702 UBA1702T |
Tamb = 75 °C |
- - |
1 0.625 |
W W |
Tstg | IC storage temperature |
-40 |
+150 |
°C | |
Tamb | operating ambient temperature |
-25 |
+75 |
°C |
The UBA1702; UBA1702A performs the high voltage interface and ringer functions of the corded analog telephone set in close cooperation with a microcontroller and transmission circuit.
The UBA1702; UBA1702A incorporates several protections, a driver for the line interrupter and a ringer.Because of the practical division of functions between the microcontroller, the transmission circuit and the UBA1702;UBA1702A, it is possible to have a higher integration level thereby reducing significantly the number of discrete components in a telephone set.