DescriptionThe TPD1035F is a low side switch.The TPD1035FIC has a veitical MOSFET output which can be driectly driven from a CMOS or TTL logic circuit (e.g., an MPU).The IC offers intelligent self protection functions. The TPD1035F has the following features include:(1)a monolithic power IC with ...
TPD1035F: DescriptionThe TPD1035F is a low side switch.The TPD1035FIC has a veitical MOSFET output which can be driectly driven from a CMOS or TTL logic circuit (e.g., an MPU).The IC offers intelligent self p...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The TPD1035F is a low side switch.The TPD1035F IC has a veitical MOSFET output which can be driectly driven from a CMOS or TTL logic circuit (e.g., an MPU).The IC offers intelligent self protection functions.
The TPD1035F has the following features include:(1)a monolithic power IC with a new structure combining a control block and a vertical power MOSFET (L2 MOS) on a single chip;(2)can directly drive a power load from a CMOS of TTL logic;(3)built-in protection circuits against ovemoltage (active clamp oveitempeiatme (thermal shutdown), and overcurrent (current limiter);(4)3-pin package for surface mounting can be packed in tape.The overheating detector circuits feature hysteresis.After overheating is detected, normal operation is restored only when the channel temperature falls by the hysteresis amount (5 typ.) in relation to the overheating detection temperature.
The absolute maximum ratings of the TPD1035F are:(1)drain-source voltage:20V;(2)storage temperature:-55 to +150;(3)operating temperature range:-40 to 110;(4)input voltage:-0.3 to 7V;(5)power dissipation:1W;(6) channel temperature:150;(7)drain current:internally limited A.TOSHIBA is continually working to improve the quality and the reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress.It is the responsibility of the buyer, when utilizing TOSHIBA products, to observe standards of safety, and to avoid situations in which a malfunction or failure of a TOSHIBA product could cause loss of human life, bodily injury or damage to property.In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent products specifications. Also, please keep in mind the precautions and conditions set forth in the TOSHIBA Semiconductor Reliability Handbook.
At present there is not too much information about this model.If you are willing to find more about TPD1035F, please pay attention to our web! We will promptly update the relevant information.