TLC3704ID

Comparator Type :
Offset Voltage (Max) : 5 mV
Mounting Style : SMD/SMT
Number of Channels : 4 Channels
Product : Analog Comparators
Maximum Operating Temperature : + 85 C
Package / Case : SOIC-14
Output Type : Push-Pull
Packaging : Tube
Response Time : 1.1 us
Supply Current (Max) : 0.02 mA
Maximum Power Dissipation : 950 mW


Features:

· Push-Pull CMOS Output Drives Capacitive
  Loads Without Pullup Resistor,
  IO = ± 8 mA
· Very Low Power . . . 200 mW Typ at 5 V
· Fast Response Time . . . tPLH = 2.7 ms Typ
  With 5-mV Overdrive
· Single Supply Operation . . . 3 V to 16 V
  TLC3704M . . . 4 V to 16 V
· On-Chip ESD Protection


Pinout




Specifications

Supply voltage range, VDD (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   - 0.3 V to 18 V
Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 18 V
Input voltage range, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.3 to VDD
Output voltage range, VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.3 to VDD
Input current, II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  ± 5 mA
Output current, IO (each output) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .± 20 mA
Total supply current into VDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 mA
Total current out of GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 mA
Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Operating free-air temperature range, TA: TLC3704C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0 to 70°C
TLC3704I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . . . . . . . . . . . . . . . . . . . . . . . .  . 40°C to 85°C
TLC3704M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55°C to 125°C
TLC3704Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40°C to 125°C
Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65°C to 150°C
Case temperature for 60 seconds: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D or N package . . . . . . . . . . . . . . . . 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: J package . . . . . . . . . . . . . . . . . . . . .300°C
† Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to network ground.
2. Differential voltages are at IN+ with respect to IN .


Description

The TLC3704 consists of four independent micropower voltage comparators designed to operate from a single supply and be compatible with modern HCMOS logic systems. They are functionally similar to the LM339 but use 1/20th the power for similar response times. The push-pull CMOS output stage of TLC3704ID drives capacitive loads directly without a power-consuming pullup resistor to achieve the stated response time. Eliminating the pullup resistor not only reduces power dissipation, but also saves board space and component cost. The output stage of TLC3704ID is also fully compatible with TTL requirements.

Texas Instruments LinCMOSE process of TLC3704ID offers superior analog performance to standard CMOS processes. Along with the standard CMOS advantages of low power without sacrificing speed, high input impedance, and low bias currents, the LinCMOS process offers extremely stable input offset voltages with large differential input voltages. This characteristic makes TLC3704ID possible to build reliable CMOS comparators.

The TLC3704ID is characterized for operation over the commercial temperature range of 0°C to 70°C. The TLC3704I is characterized for operation over the extended industrial temperature range of 40°C to 85°C. The TLC3704M is characterized for operation over the full military temperature range of 55°C to 125°C. The TLC3704Q is characterized for operation from 40°C to 125°C.

Parameters:

Technical/Catalog Information	TLC3704ID
Vendor	Texas Instruments
Category	Integrated Circuits (ICs)
Type	General Purpose
Output Type	CMOS, Push-Pull, TTL
Voltage - Supply	3 V ~ 16 V
Number of Elements	4 - Quad
Package / Case	14-SOIC (3.9mm Width), 14-SOL
Packaging	Tube
Drawing Number	296; 4040047-3; D; 14
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	TLC3704ID TLC3704ID 296 1843 5 ND 29618435ND 296-1843-5