TCET1102

Isolation Voltage : 5000 Vrms
Packaging : Tube
Maximum Operating Temperature : + 100 C
Minimum Operating Temperature : - 40 C
Maximum Collector Emitter Saturation Voltage : 0.3 V
Maximum Forward Diode Voltage : 1.6 V
Maximum Collector Current : 50 mA
Input Type : DC
Package / Case : PDIP-4
Maximum Collector Emitter Voltage : 70 V
Current Transfer Ratio : 125 %
Maximum Power Dissipation : 265 mW


Features:

Approvals:
`BSI: BS EN 41003, BS EN 60095 (BS 415), BS EN 60950 (BS 7002), Certificate number 7081 and 7402
`FIMKO (SETI): EN 60950, Certificate number 11027
`Underwriters Laboratory (UL) 1577 recognized, file number E-76222 Double Protection
`CSA (C-UL) 1577 recognized file number E- 76222 - Double Protection
`VDE 0884, Certificate number 115667 VDE 0884 related features:
`Rated impulse voltage (transient overvoltage) VIOTM = 8 kV peak
`Isolation test voltage (partial discharge test voltage) Vpd = 1.6 kV
`Rated isolation voltage (RMS includes DC) VIOWM = 600 VRMS (848 V peak)
`Rated recurring peak voltage (repetitive) VIORM = 600 VRMS
`Creepage current resistance according to VDE 0303/IEC 112 Comparative Tracking Index: CTI . 175
`Thickness through insulation . 0.75 mm
`Internal creepage distance > 4 mm General features:
`CTR offered in 9 groups
`Isolation materials according to UL94-VO
`Pollution degree 2 (DIN/VDE 0110 / resp. IEC 664)
`Climatic classification 55/100/21 (IEC 68 part 1)
`Special construction: Therefore, extra low coupling capacity of typical 0.2 pF, high Common Mode Rejection
`Low temperature coefficient of CTR
`G = Leadform 10.16 mm; provides creepage distance > 8 mm, for TCET2100/ TCET4100 optional; suffix letter 'G' is not marked on the optocoupler
`Coupling System U




Application

Circuits for safe protective separation against electrical shock according to safety class II (reinforced isolation):
`For appl. class I IV at mains voltage 300 V
` For appl. class I III at mains voltage 600 V
according to VDE 0884, table 2, suitable for: Switch-mode power supplies, line receiver, computer peripheral interface, microprocessor system interface.




Specifications

Parameter	TestConditions	Symbol	Value	Unit
Reverse voltage Forward current Forward surge current Power dissipation Junction temperature	tp 10 s Tamb 25	VR IF IFSM PV Tj	6 60 1.5 100 125	V mA A mW

Description

Optocoupler, Phototransistor Output, High Temperarure. The TCET110/ TCET2100/ TCET4100 consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 4-lead up to 16-lead plastic dual inline package.

The elements of TCET110/ TCET2100/ TCET4100 are mounted on one leadframe using a coplanar technique, providing a fixed distance between input and output for highest safety requirements.