PD10NG-053R3Z2:1H30

The PD10NG-053R3Z2:1H30 is produced by the PEAK electronics with 1 KV isolated 2W regulated dual output SIP8.The electrical specifications(typical at + 25,nominal input voltage,rated output current unless otherwise specified) can be summarized as:(1)input voltage range:4.5-9,9-18,18-36 and 36-72 VDC wide input;(2)input filter:capacitor type;(3)isolation rated voltage:3000 VDC;(4)isolation resistance:>1 G;(5)isolation capacitance:72PF;(6)output voltage accuracy:+/-2%, typ.;(7)ripple and noise (at 20 MHz BW):100 mV p-p,max.;(8)short circuit protection:continuous, auto restart;(9)line voltage regulation:+/-0.2% typ.;(10)load voltage regulation:+/-0.5 % typ.load=10 to 100%;(11)temperature coefficient:+/-0.02%/;(12)efficiency:continuous, auto restart;(13)switching frequency:75 KHz,typ.;(14)operating temperature(ambient):-40 to +80 ;(15)storage temperature:-55 to +125;(16)humidity:up to 90 %,non condensing;(17)cooling:free air convection.

The external capacitance of PD10NG-053R3Z2:1H30:these converters will work with without external capacitors but they are necessary in order to guarantee the full line load range. All parts have been tested using the following recommended values.There are the application notes of PD10NG-053R3Z2:1H30:(1)the outside control connection.this pin provides the converter output ON/OFF,and the control common is referred to negative input.(2)this pin belongs to the secondary side.it just avoids someone to reverses the primary and secondary.