PCF85102C-2

Features:

` Low power CMOS:
maximum operating current: 2.0 mA
maximum standby current 10 mA (at 6.0 V), typical 4 mA.
` Non-volatile storage of:
2 kbits organized as 256 ´ 8-bit.
` Single supply with full operation down to 2.5 V
` On-chip voltage multiplier
` Serial input/output I2C-bus
` Write operations:
     byte write mode
     8-byte page write mode (minimizes total write time per byte).
` Read operations:
     sequential read
     random read.
` Internal timer for writing (no external components)
` Power-on reset
` High reliability by using a redundant storage code
` Endurance: 1000000 Erase/Write (E/W) cycles at Tamb = 22
` 10 years non-volatile data retention time
` Standard industrial pinning (pin 7 not connected)
` Up to sixteen EEPROMs addressable in one I2C-using both PCF85102 and PCF85103 in combination.


Pinout




Specifications

SYMBOL	PARAMETER	CONDITIONS	MIN.	MAX.	UNIT
VDD	supply voltage		-0.3	+6.5	V
VI	input voltage on input pins	|Zi| > 500	VSS - 0.8	+6.5	V
II	input current on input pins		-	1	mA
IO	output current		-	10	mA
Tstg	storage temperature		-65	+150
Tamb	ambient temperature		-40	+85

Description

The PCF85102C-2 and PCF85103C-2 (further referred to as PCF8510xC-2) are 2 kbits (256 ´ 8-bit) floating gate Electrically Erasable Programmable Read Only Memories (EEPROMs). Power consumption of PCF85102C-2 is low due to the full CMOS technology used. The programming voltage is generated on-chip, using a voltage multiplier. The PCF8510x-2 is pin compatible to widely used industrial pinning (pin 7 not connected).

As data bytes of PCF85102C-2 are received and transmitted via the serial I2C-bus, a package using eight pins is sufficient. Up to sixteen PCF8510xC-2 devices may be connected to the I2C-bus. PCF85102C-2 is possible with the introduction of a second device selection code. Chip select is accomplished by three address inputs (A0, A1 and A2) for each PCF8510xC-2 type.