Features: · Directly Drives 16-segment x 15-digit· High VFD Driving Voltage :|VDD-VFDP|=45V· Display Shift Function· Programmable Duty Ratio for Timing Signal :2/16, 4/16, 6/16, 8/16, 10/16, 12/16, 14/16, 15/16 duty· Display ON/OFF Control Function· Display Data RAM: 30 x 8-bit· Built-in Oscillato...
NJU3426: Features: · Directly Drives 16-segment x 15-digit· High VFD Driving Voltage :|VDD-VFDP|=45V· Display Shift Function· Programmable Duty Ratio for Timing Signal :2/16, 4/16, 6/16, 8/16, 10/16, 12/16, ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
PARAMETER | SYMBOL | RATINGS | UNIT | CONDITIONS |
Operation voltage | VDD | -0.3 to +7.0 | V | |
Input voltage | VIN | -0.3 to VDD+0.3 | V | |
VFD driving voltage | VFDP | VDD-45 to VDD+0.3 | V | Relative to VDD. |
"H" level output current | IOH1 | -15 | mA | 1 pin out of S0 to S15 pins |
IOH2 | -35 | mA | 1 pin out of T0 to T13 pins | |
"H" level Total output current |
IOH | -100 | mA | All output pins |
"L" level output current | IOL | 20 | mA | |
"L" level Total output current |
IOL | 100 | mA | All output pins |
Operating temperature | Topr | -40 to 85 | °C | |
Storage temperature | Tstg | -55 to 125 | °C | |
Power dissipation | PD | T.B.D. | mW | QFP |
Note 1): The LSI must be used inside of the "Absolute maximum ratings". Otherwise, an electrical or physical stress may cause permanent damage to the LSI.
Note 2): De-coupling capacitors for VDD and VSS and VFDP and VSS must be connected for stabble operation.
Note 3): The following voltage relation must be maintained; VDD> VSS VFDP, VSS=0.
The NJU3426 is a VFD (Vacuum Fluorescent Display) controller/driver to dynamically drive up to 16 segments x 15 digits. It consists of display data RAM, an address counter,command registers, a serial interface and high voltage drivers.
The direct control from the MPU and high voltage drivers of 45V make the NJU3426 well suited for various VFD displays.