MNDS26LV31-X

Features: ·Outputs won't load line when Vcc = 0V·Comparable to both EIA RS-422 and ITU-T V.11 standards.·TRI-STATE outputs for connection to system buses·Low quiescent current·ESD Rating (HBM, 1.5K ohm, 100pF) >2500V·Typical Part to Part Skew < TBDSpecificationsSupply Voltage (Vcc).............

product image

MNDS26LV31-X Picture
SeekIC No. : 004424775 Detail

MNDS26LV31-X: Features: ·Outputs won't load line when Vcc = 0V·Comparable to both EIA RS-422 and ITU-T V.11 standards.·TRI-STATE outputs for connection to system buses·Low quiescent current·ESD Rating (HBM, 1.5K ...

floor Price/Ceiling Price

Part Number:
MNDS26LV31-X
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/11/26

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

· Outputs won't load line when Vcc = 0V
· Comparable to both EIA RS-422 and ITU-T V.11 standards.
· TRI-STATE outputs for connection to system buses
· Low quiescent current
· ESD Rating (HBM, 1.5K ohm, 100pF) >2500V
· Typical Part to Part Skew < TBD



Specifications

Supply Voltage (Vcc).............................................-0.5V to 7.0V
DC Input Voltage (Vin)..................................-0.5V to Vcc +0.5V
DC Output Voltage (Vout) Power off........................-0.5V to 7V
Clamp Diode Current (Iik, Iok).......................................+ 20mA
DC Output Current, per Pin (Iout)...............................+ 150mA
Storage Temperature Range (Tstg)..................-65 C to +150 C
Lead Temperature (Tl)
(Soldering, 4 seconds) .....................................................260 C
Maximum Power Dissipation .............................................+25C
(Note 3).......................................................................1119mW
Thermal Resistance. (Theta JA)...............................134 C/Watt
Thermal Resistance. (Theta JC)..............................12.5 C/Watt
Note 1: Absolute Maximum  Ratings are those values beyond
which the safety of the device  cannot  be  guaranteed.  They
are not meant to imply that  the device  should  be  operated
at these limits. The table of "Electrical Characteristics" provide
conditions for actual device operation.
Note 2: Unless otherwise specified, all voltages are referenced
to ground. All currents into device pins are positive, all currents
out of device pins are negative.
Note 3: Derate W package 7.5mW/C above +25C.



Description

The DS26lV31 is a high-speed quad differential CMOS driver that is comparable to the TIA/EIA-422-B and ITU-T V.11 standards. The CMOS DS26LV31 features low static ICC of 125 uA Max which makes it ideal for battery powered and power conscious applications. Differential outputs have the same VOD guarantee (>2V) as the 5V version.

The EN and EN inputs allow active Low or active High control of the TRI-STATE outputs. The DS26lV31 enables are common to all four drivers. Protection diodes protect all the driver inputs against electrostatic discharge. The driver and enable inputs (DI, EN, EN) are compatible with low voltage LVTTL and LVCMOS devices.




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
RF and RFID
Computers, Office - Components, Accessories
Integrated Circuits (ICs)
Optoelectronics
View more