ML6553

• Can source and sink up to 1A
• Generates termination voltages for DDR SDRAM, SSTL_2 SDRAM, SGRAM, or equivalent memories
• Generates termination voltages for active termination schemes for GTL+, DDR, Rambus™, VME, LV-TTL,PECL and other high speed logic
• V_Lregulated to within 3% at 800mA
• Minimum external components. Requires no feedback compensation
• Fixed frequency operation for easier system integration
• Lower power consumption than passive, resistor divider termination, reducing heat by as much as 50%
• Separate voltages for V_CCQ and PV_DD

Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied.

The ML6553 switching regulator is designed to convert voltage supplies ranging from 2.0V to 3.6V into a desired output voltage or termination voltage for various applications.The ML6553 can be implemented to produce regulated output voltages in two different modes. In the default mode, the output is 50% of voltage applied to V_CCQ.The switching regulator is capable of sourcing or sinking up to 1A of current.The ML6553, used in conjunction with series termination resistors, provides an excellent voltage source for active termination schemes of high speed transmission lines as those seen in high speed memory buses and distributed backplane designs. The voltage output of the regulator ML6553 can be used as a termination voltage for other bus interface standards such as SSTL, DDR, Rambus™, GTL+, VME,LV-CMOS, LV-TTL, P-ECL, and CMOS.