Features: ·18 GHz to 40 GHz Frequency Band·4.5 dB Noise Figure·12dB Gain·14 dBm Output Power at Saturation·+3 V Single Bias SupplyApplicationThe Filtronic Solid State LMA406 is a low noise PHEMT amplifier that operates from 18 to 40GHz. This 2-stage amplifier provides 12dB nominal gain with 4.5dB ...
LMA406: Features: ·18 GHz to 40 GHz Frequency Band·4.5 dB Noise Figure·12dB Gain·14 dBm Output Power at Saturation·+3 V Single Bias SupplyApplicationThe Filtronic Solid State LMA406 is a low noise PHEMT amp...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The Filtronic Solid State LMA406 is a low noise PHEMT amplifier that operates from 18 to 40GHz. This 2-stage amplifier provides 12dB nominal gain with 4.5dB typical noise figure and 1-dB gain compression power output of +10dBm that is designed for commercial mmW (millimeter-wave) PCN/PCS applications. Ground is provided to the circuitry through vias to the backside metallization.
Parameter |
Symbol |
Test Conditions |
Max |
Units | |
Drain Voltage |
VD |
TAmbient = 22 ± 3 |
4 |
V | |
Operating Current |
IOP |
TAmbient = 22 ± 3 |
120 |
mA | |
RF Input Power |
PIN |
TAmbient = 22 ± 3 |
10 |
dBm | |
Total Power Dissipation |
PTOT |
TAmbient = 22 ± 3 |
48 |
W | |
Channel Operating Temperature |
TCH |
TAmbient = 22 ± 3 |
150 |
||
Storage Temperature |
TSTG |
- |
-65 |
165 |
|
Maximum Assembly Temperature (1 min. max.) |
TMAX |
- |
300 |
Notes:
` Operating conditions that exceed the Absolute Maximum Ratings could result in permanent damage to the device.
` Recommended Continuous Operating Limits should be observed for reliable device operation.
` Power Dissipation defined as: PTOT = (PDC + PIN) POUT, where
PDC: DC Bias Power
PIN: RF Input Power
POUT: RF Output Power
` This GaAs MMIC is susceptible to damage from Electrostatic Discharge. Proper precautions should be used when
handling these devices.
The Filtronic Solid State LMA406 is a low noise PHEMT amplifier that operates from 18 to 40GHz. This 2-stage amplifier provides 12dB nominal gain with 4.5dB typical noise figure and 1-dB gain compression power output of +10dBm that is designed for commercial mmW (millimeter-wave) PCN/PCS applications. Ground is provided to the circuitry through vias to the backside metallization.