LH28F160S3HT-L10A

Series: -
Operating Temperature: -40°C ~ 85°C
Format - Memory: FLASH
Memory Type: FLASH
Interface: Parallel
Packaging: Tray
Voltage - Supply: 3 V ~ 3.6 V
Speed: 100ns
Memory Size: 16M (2M x 8, 1M x 16)
Package / Case: 56-TFSOP (0.724", 18.40mm Width)
Supplier Device Package: 56-TSOP
Manufacturer: Sharp Microelectronics


Application

·Office electronics
· instrumentation and measuring equipment
·Machine tools
·Audiovisual equipment
·Home appliance
·Communication equipment other than for trunk lines

Specifications

Operating Temperature
    During Read, Erase, Write and
    Block Lock-Bit Configuration . . . ..-40 to +85⁽¹⁾
    Temperature under Bias . . . .. . . . . . -40 to +85
Storage Temperature . . . . . . . . .. . . . -65 to +125
Voltage On Any Pin
    (except Vcc,Vpp ) . . . . . .  . .  . .  .- 0.5v to +0.5V⁽²⁾
Vcc Supply Voltage . . . . . . . .. . . . . .-0.2V to +7.0V⁽²⁾
Vpp Update Voltage during
    Erase, Write and
    Block Lock-Bit Configuration.. . . . -0.2V to +7.0V⁽²⁾
Output Short Circuit Current . . . . . .. . . . . ..  l00mA⁽³⁾
1. Operating temperature is for commercial temperature product defined by this specification.
2. All specified voltages are with respect to GND. Minimum DC voltage is -0.5V on input/output pins and -0.2V on Vcc and Vpp pins. During transitions, this level may undershooto -2.0V for periods <20ns. Maximum DC voltage on input/output pins are Vcc+O.5V which, during transitions. may overshoot to Vcc+2.0V for periods <20ns.
3. Output shorted for no more than one second. No more than one output shorted at a time.