FET Type: MOSFET N-Channel, Metal Oxide
Transistor Type: -
Current - Collector (Ic) (Max): -
FET Feature: Logic Level Gate
Drain to Source Voltage (Vdss): 30V
Voltage - Collector Emitter Breakdown (Max): -
Vce Saturation (Max) @ Ib, Ic: -
Current - Collector Cutoff (Max): -
DC Current Gain (hFE) (Min) @ Ic, Vce: -
Frequency - Transition: -
Vgs(th) (Max) @ Id: 1V @ 250µA
Series: HEXFET®
Packaging: Tube
Mounting Type: Through Hole
Input Capacitance (Ciss) @ Vds: 5000pF @ 25V
Package / Case: TO-220-3 Full Pack
Manufacturer: International Rectifier
Current - Continuous Drain (Id) @ 25° C: 76A
Power - Max: 63W
Supplier Device Package: TO-220AB Full-Pak
Gate Charge (Qg) @ Vgs: 140nC @ 4.5V
Rds On (Max) @ Id, Vgs: 6 mOhm @ 40A, 10V
Specifications
|
Parameter |
Max. |
Units |
| ID @ TC = 25°C |
Continuous Drain Current, VGS @ 10V |
76 |
A |
| ID @ TC = 100°C |
Continuous Drain Current, VGS @ 10V |
54 |
|
| IDM |
Pulsed Drain Current |
740 |
|
| PD @TC = 25°C |
C Power Dissipation |
63 |
W |
|
Linear Derating Factor |
0.42 |
W/°C |
| VGS |
Gate-to-Source Voltage |
±16 |
V |
| EAS |
Single Pulse Avalanche Energy |
610 |
mJ |
| IAR |
Avalanche Current |
71 |
A |
| EAR |
Repetitive Avalanche Energy |
6.3 |
mJ |
| dv/dt |
Peak Diode Recovery dv/dt |
5.0 |
V/ns |
TJ
TSTG |
Operating Junction and
Storage Temperature Range |
-55 to + 175 |
°C |
|
Soldering Temperature, for 10 seconds |
300 (1.6mm from case ) |
|
|
Mounting torque, 6-32 or M3 screw. |
10 lbf•in (1.1N•m) |
|
DescriptionFifth Generation HEXFETs from International Rectifier IRLI3803utilize advanced processing techniques to achieve extremely low on-resistance per silicon area. Thisbenefit, combined with the fast switching speed and ruggedized device IRLI3803 design that HEXFET Power MOSFETs are well known for, provides the designer with an extremely efficient and reliable device for use in a wide variety of applications.
The TO-220 Fullpak eliminates the need for additional insulating hardware in commercial-industrial applications.
The moulding compound used provides a high isolation capability and a low thermal resistance between the tab and external heatsink. This isolation is equivalent to using a 100 micron mica barrier with standard TO-220 product.
The Fullpak is mounted to a heatsink using a single clip or by a single screw fixing.
IRLI3803 Data Sheet
