IR05H40CSPTR

Peak Reverse Voltage :
Configuration :
Recovery Time :
Maximum Reverse Leakage Current :
Maximum Power Dissipation :
Operating Temperature Range :
Mounting Style : SMD/SMT
Packaging : Reel
Product : Schottky Rectifiers
Forward Continuous Current : 0.5 A
Max Surge Current : 190 A
Forward Voltage Drop : 0.58 V at 1 A
Package / Case : FlipKY


Features:

• Ultra Low V_F To Footprint Area
• Very Low Profile (<0.6mm)
• Low Thermal Resistance
• Supplied Tested And On Tape & Reel


Application

• Reverse Polarity Protection
• Current Steering
• Freewheeling
• Flyback
• Oring


Specifications

Parameters	Value	Units	Conditions
IF(AV)  Max. Average Forward Current	0.5	A	50% duty cycle @ TPCB = 114 , rectangular wave form
IFSM Max. Peak One Cycle Non-Repetitive Surge Current @ 25	190	A	5s Sine or 3s Rect. pulse	Following any rated load condition and with rated VRRM applied
	10		10ms Sine or 6ms Rect. pulse
EAS Non- Repetitive Avalanche Energy	5	mJ	TJ = 25 , IAS = 2.0A, L = 5.0mH
IAR Repetitive Avalanche Current	0.5	A	Current decaying linearly to zero in 1 sec Frequency limited by TJ max. Va = 1.5 x Vr typical

Description

International Rectifier's FlipKY product family utilizes wafer level chip scale packaging to deliver Schottky diodes with the lowest VF to PCB footprint area in industry. The three pad 0.9mm x 1.2mm devices can deliver up to 0.5A and occupy only 1.08mm2 of board space. The anode and cathode connections of the IR05H40CSPTR are made through solder bump pads on one side of the silicon rather than through protruding leads enabling designers to strategically place the diodes on the PCB. This design not only minimizes board space but also reduces thermal resistance and inductance, which can improve overall circuit efficiency.

Typical applications of the IR05H40CSPTR include hand-held, portable equipment such as cell phones, MP3 players, PDAs, and portable hard
disk drives where space savings and performance are crucial.