IR0530CSPTRPBF

Configuration :
Recovery Time :
Maximum Power Dissipation :
Mounting Style : SMD/SMT
Product : Schottky Diodes
Peak Reverse Voltage : 30 V
Packaging : Reel
Maximum Reverse Leakage Current : 50 uA
Forward Continuous Current : 0.5 A
Operating Temperature Range : - 55 C to + 150 C
Max Surge Current : 190 A
Package / Case : FlipKY
Forward Voltage Drop : 0.49 V at 1 A


Features:

·Ultra Low V_F To Footprint Area
·Very Low Profile (<0.6mm)
·Low Thermal Resistance
·Supplied Tested And On Tape & Reel
·Lead-Free ("PbF" suffix)

Application

·Reverse Polarity Protection
·Current Steering
·Freewheeling
·Flyback
·Oring


Specifications

Parameters	Value	Units	Conditions
IF(AV) Max. Average Forward Current	0.5	A	50% duty cycle @ TPCB = 133, rectangular wave form
IFSM Max. Peak One Cycle Non-Repetitive Surge Current @ 25	190	A	5s Sine or 3s Rect. pulse	Following any rated load condition and with rated VRRM applied
	10		10ms Sine or 6ms Rect. pulse
EAS Non- Repetitive Avalanche Energy	5	mJ	TJ = 25, IAS = 2.0A, L = 5.0mH
AR Repetitive Avalanche Current	0.5	A	Current decaying linearly to zero in 1 sec Frequency limited by TJ max. Va = 1.5 x Vr typical

Description

International Rectifier's FlipKY product family utilizes wafer level chip scale packaging to deliver Schottky diodes with the lowest V_F to PCB footprint area in industry. The three pad 0.9mm x 1.2mm devices can deliver up to 0.5A and occupy only 1.08mm2 of board space. The anode and cathode connections of the IR0530CSPTRPbF are made through solder bump pads on one side of the silicon rather than through protruding leads enabling designers to strategically place the diodes on the PCB. This design not only minimizes board space but also reduces thermal resistance and inductance, which can improve overall circuit efficiency.

Typical applications of the IR0530CSPTRPbF include hand-held, portable equipment such as cell phones, MP3 players, PDAs, and portable hard
disk drives where space savings and performance are crucial.