Power Driver ICs IPS 1 Ch Low Side Driver
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
DescriptionThe IPS5451STRPBF is one member of the IPS5451 series.The IPS5451 is fully protected fi...
Product : | H-Bridge Drivers | Type : | High Side |
Rise Time : | 130 us | Fall Time : | 16 us |
Supply Voltage - Max : | 35 V | Supply Voltage - Min : | 5.5 V |
Supply Current : | 10 mA | Maximum Power Dissipation : | 1 W |
Mounting Style : | SMD/SMT | Package / Case : | SOIC-8 |
Packaging : | Tube |
Symbol |
Definition |
Min. |
Max. |
Units |
Test Conditions |
Vout |
Maximum output voltage |
Vcc-50 |
Vcc+0.3 |
V |
|
Voffset |
Maximum logic ground to load ground offset |
Vcc-50 |
Vcc+0.3 | ||
Vin |
Maximum Input voltage |
-0.3 |
5.5 | ||
Iin, max |
Maximum positive IN current |
-5 |
10 |
mA | |
Vdg |
Maximum diagnostic output voltage |
-0.3 |
5.5 |
V | |
Idg, max |
Maximum diagnostic output current |
-1 |
10 |
mA | |
Isd cont. |
Diode max. permanent current (1) (rth=62oC/W) |
- |
1.4 |
A |
|
Isd pulsed |
Diode max. pulsed current (1) |
- |
10 | ||
ESD1 |
Electrostatic discharge voltage (Human Body) |
- |
4 |
KV |
C=100pF, R=1500, |
ESD2 |
Electrostatic discharge voltage (Machine Model) |
- |
0.5 |
C=200pF, R=0, L=10H | |
Pd |
Maximum power dissipation(1) (TC=25oC) IPS521 (TC=25oC) IPS521S |
- |
1
|
W |
|
- | |||||
Tj max. |
Max. storage & operating junction temp. |
-40 |
+150 |
oC |
|
Vcc max. |
Maximum Vcc voltage |
- |
50 |
V |
The IPS521G is a fully protected five terminal high side switch with built in short circuit, over-temperature, ESD protection, inductive load capability and diagnostic feedback. The output current is controlled when it reaches Ilim value. The current limitation is activated until the thermal protection acts. The over-temperature protection turns off the high side switch if the junction temperature exceeds Tshutdown. It will automatically restart after the junction of the IPS521G has cooled 7oC below Tshutdown. A diagnostic pin is provided for status feedback of short-circuit, over-temperature and open load detection. The double level shifter circuitry allows large offsets between the logic ground and the load ground.
Technical/Catalog Information | IPS521G |
Vendor | International Rectifier |
Category | Integrated Circuits (ICs) |
Package / Case | 8-SOIC (3.9mm Width) |
Mounting Type | Surface Mount |
Type | High Side |
Voltage - Supply | 5.5 V ~ 35 V |
On-State Resistance | 80 mOhm |
Current - Output / Channel | 1.6A |
Current - Peak Output | 10A |
Packaging | Tube |
Input Type | Non-Inverting |
Number of Outputs | 1 |
Operating Temperature | -40°C ~ 150°C |
Lead Free Status | Contains Lead |
RoHS Status | RoHS Non-Compliant |
Other Names | IPS521G IPS521G |