IPS511G

Rise Time :
Fall Time :
Maximum Operating Temperature :
Mounting Style : SMD/SMT
Package / Case : SOIC-8
Packaging : Tube
Supply Voltage - Min : 5.5 V
Product : H-Bridge Drivers
Supply Voltage - Max : 35 V
Type : High Side
Maximum Power Dissipation : 1 W
Supply Current : 10 mA


Features:

• Over temperature protection (with auto-restart)
• Short-circuit protection (current limit)
• Active clamp
• E.S.D protection
• Status feedback
• Open load detection
• Logic ground isolated from power ground


Pinout




Specifications

Symbol	Parameter	Min.	Max.	Units	Test Conditions
Vout	Maximum output voltage	Vcc-50	Vcc+0.3	V
Voffset	Maximum logic ground to load ground offset	Vcc-50	Vcc+0.3
Vin	Maximum Input voltage	-0.3	5.5
Iin, max	Maximum IN current	-5	10	mA
Vdg	Maximum diagnostic output voltage	-0.3	5.5	V
Idg, max	Maximum diagnostic output current	-1	10	mA
Isd cont.	Diode max. continuous current (1) (IPS511G)	-	1.4	A
	(per leg/both legs ON - IPS512G)	-	0.8
Isd pulsed	Diode max. pulsed current (1)	-	10
ESD1	Electrostatic discharge voltage (Human Body)	-	4000	V	C=100pF, R=1500Ω,
ESD2	Electrostatic discharge voltage (Machine Model)	-	500		C=200pF, R=0Ω, L=10µH
Pd	Maximum power dissipation (rth=125/W) IPS511G	-	1	W
	(rth=85/W, both legs on) IPS512G	-	1.5
Tj max.	Max. storage & operating junction temp.	-40	+150
Vvv max	Maximum Vcc voltage	-	50	V

Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are referenced to GROUND lead. (Tj = 25 unless otherwise specified).


Description

The IPS511G are fully protected five terminal high side switches with built in short-circuit, over-temperature, ESD protection, inductive load capability and diagnostic feedback. The output current is controlled when it reaches Ilim value. The current limitation is activated until the thermal protection acts. The over-temperature protection turns off the high side switch if the junction temperature exceeds Tshutdown. It will automatically restart after the junction of the IPS511G has cooled 7 below Tshutdown. A diagnostic pin is provided for status feedback of short-circuit, overtemperature and open load detection. The double level shifter circuitry allows large offsets between the logic ground and the load ground.

Parameters:

Technical/Catalog Information	IPS511G
Vendor	International Rectifier
Category	Integrated Circuits (ICs)
Package / Case	8-SOIC (3.9mm Width)
Mounting Type	Surface Mount
Type	High Side
Voltage - Supply	5.5 V ~ 35 V
On-State Resistance	130 mOhm
Current - Output / Channel	1.4A
Current - Peak Output	10A
Packaging	Tube
Input Type	Non-Inverting
Number of Outputs	1
Operating Temperature	-40°C ~ 150°C
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	IPS511G IPS511G