EPC2LC20

The EPC2LC20 is designed as one kind of configuration EPROMs for FLEX devices.

EPC2LC20 has nine features. (1)Serial EPROM family for configurting FLEX devices. (2)Easy-to-use 4-pin to FLEX devices. (3)Low current during configuration and near-zero standby current. (4)5.0V and 3.3V operation. (5)Software design support with the altera MAX+PLUS II development system for 486- and pentium-based PCs, and sun SPARC station, HP 9000 series 700/800 and IBM RISC system/6000 workstations. (6)Programming support with altera's master programming unit (MCU) and programming hardware from data I/O, BP microsystems and other manufacturers. (7)Available in compact plastic package 20 pin plastic J-lead chip carrier PLCC package. (8)Has reprogrammable FLASH configuration memory. Those are all the main features.

Some absolute maximum ratings of EPC2LC20 have been concluded into several points as follow. (1)Its supply voltage would be min -2.0V and max 7.0V. (2)Its DC input voltage would be min -2.0V and max 7.0V. (3)Its DC Vcc or ground current would be max 50mA. (4)Its DC output current per pin would be min -25mA and max 25mA. (5)Its power dissipation would be max 250mW. (6)Its storage temperature range would be from -65°C to 150°C. (7)Its ambient temperature range would be from -65°C to 135°C. (8)Its junction temperature would be 135°C. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some electrical characteristics of EPC2LC20 are concluded as follow. (1)Its high level input voltage would be min 2.0V and max Vcc+0.3V. (2)Its low level input voltage would be min -0.3V and max 0.8V. (3)Its 5-V mode high level TTL output voltage would be min 2.4V. (4)Its 3.3V mode high level CMOS output voltage would be min Vcc-0.2V. (5)Its low level output voltage would be max 0.45V. And so on. If you have any question or suggestion or want to know more information please contact us for details. Thank you!