Features: • Low Noise Figure: 0.8ÊdB Typical at 4ÊGHz• Low Bias: VDS = 2 V, IDS = 20ÊmA• High Associated Gain: 13.0ÊdB Typical at 4ÊGHz• High Output Power: 20.0ÊdBm Typical P1dB at 4ÊGHz• Cost Effective Ceramic Microstrip Pack...
ATF-10236: Features: • Low Noise Figure: 0.8ÊdB Typical at 4ÊGHz• Low Bias: VDS = 2 V, IDS = 20ÊmA• High Associated Gain: 13.0ÊdB Typical at 4ÊGHz• High Ou...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol | Parameter | Units | Absolute Maximum[1] |
VDS | Drain Source Voltage | V | +5 |
VGS | Gate Source Voltage | V | -4 |
VGD | Gate-Drain Voltage | V | -7 |
ID | Drain Current | mA | IDSS |
PT | Power Dissipation [2,3] | mW | 430 |
TCH | Channel Temperature | °C | 175 |
TSTG | Storage Temperature[4] | °C | 175 |
Notes:
1. Permanent damage may occur if any of these limits are exceeded.
2. TCASE TEMPERATURE = 25°C.
3. Derate at 2.9 mW/°C for TCASE > 25°C.
4. Storage above +150°C may tarnish the leads of this package making it difficult to solder into a circuit.After a device has been soldered into a circuit, it may be safely stored up to 175°C.
5. The small spot size of this technique results in a higher, though more accurate determination of jct han do alternate methods. See MEASUREMENTS section for more information.
The ATF-10236 is a high performance gallium arsenide Schottky-barriergate field effect transistor housed in a cost effective microstrip package. Its low noise figure makes this device appropriate for use in the first and second stages of low noise amplifiers operating in the 0.5-12ÊGHz frequency range.
This GaAs FET device ATF-10236 has a nominal 0.3 micron gate length using airbridge interconnects between drain fingers. Total gate periphery is 500 microns. Proven gold based metallization systems and nitride passivation assure a rugged, reliable device.