Features: ` ADVANCED CMOS EEPROM TECHNOLOGY` READ/WRITE NON-VOLATILE MEMORY` WIDE VCC OPERATION : VCC = 1.8V to 5.5V` AK6010A ・・ 32768 bits, 4096 x 8 organization AK6012A ・・ 65536 bits, 8192 x 8 organization` I2CTM SERIAL INTERFACE` LOW POWER CONSUMPTION - 0.8A Max. Sta...
AK6010A: Features: ` ADVANCED CMOS EEPROM TECHNOLOGY` READ/WRITE NON-VOLATILE MEMORY` WIDE VCC OPERATION : VCC = 1.8V to 5.5V` AK6010A ・・ 32768 bits, 4096 x 8 organization AK6012A ・}...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Parameter |
Symbol |
Min |
Max |
Unit |
Power Supply |
VCC |
-0.6 |
+7.0 |
V |
All Input Voltages with Respect to Ground |
VIO |
-0.6 |
VCC+0.6 |
V |
Ambient Storage Temperature |
Tst |
-65 |
+150 |
The AK6010A/12A is a 32768/65536-bit serial CMOS EEPROM divided into 4096/8192 registers of 8 bits each.
The AK6010A/12A can operate full function under wide operating voltage range from 1.8V to 5.5V. The charge up circuit is integrated for high voltage generation that is used for write operation.
The AK6010A/12A conforms to all specifications in the 2 wire protocol and is controlled by serial clock (SCL) and serial data (SDA) line.
AK6010A/12A can be connected to the same bus. Each device connected to the bus is software addressable by a unique address, and can operate as either a transmitter or receiver. In addition to transmitters and receivers, devices can also be considered as masters or slaves when performing data transfers (see Table1). The master is the device which initiates a data transfers on the bus and generates the clock signals to permit that transfer. At that time, the device addressed is considered as the slave.