Features: · ACT4404N transceiver meets MIL-STD-1553A & B, Macair A3818, A4905, A5232 and A5690 specs· Bipolar supply ±15V to ±12V, logic supply +5V· Monolithic construction· Direct replacement for CT3232M· Voltage source output for higher bus drive power· Variable receiver threshold capability...
ACT4404N: Features: · ACT4404N transceiver meets MIL-STD-1553A & B, Macair A3818, A4905, A5232 and A5690 specs· Bipolar supply ±15V to ±12V, logic supply +5V· Monolithic construction· Direct replacement f...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Operating Case Temperature |
-55°C to +125°C | |
Storage Case Temperature |
-65°C to +150°C | |
Power Supply Voltages |
±15VDC to ±18VDC |
+5VDC to +7VDC |
Logic Input Voltage |
-0.3 V to +5.5 V | |
Receiver Differential Input |
±40 V | |
Receiver Input Voltage (Common Mode) |
±10V | |
Driver Peak Output Current |
150 mA | |
Total Package Power Dissipation over the Full Operating Case Temperature Range * |
3.25 Watts | |
Maximum Junction to Case Temperature (100% duty cycle) |
16.25°C | |
Junction-Case, Thermal Resistance |
5°C/W |
The Aeroflex-Plainview transceiver model ACT4404N is a new generation monolithic transceiver which provide full compliance with Macair and MIL-STD-1553 data bus requirements.
The model ACT4404N performs the front-end analog function of inputting and outputting data through a transformer to a MIL-STD-1553 or Macair data bus. The ACT4404N can be considered a "Universal" Transceiver in that it is compatible with MIL-STD-1553A/B, Macair (A-3818, A-4905, A-5232 and A-5690).
Design of these transceivers ACT4404N reflects particular attention to active filter performance. This results in low bit and word error rate with superior waveform purity and minimal zero crossover distortion. The ACT4404N active filter design has additional high frequency roll-off to provide the required Macair low harmonic distortion waveform without increasing the pulse delay characteristics significantly.
Efficient transmitter electrical and thermal design of ACT4404N provides low internal power dissipation and heat rise at high and well as low duty cycles. An optional receiver input threshold adjustment can be accomplished by the use of the ''External Threshold" terminals.