© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
Surface mount, silver (Ag) coated ceramic filter KFF6514A . Developed for use in InMarSat infrastructure and subscriber applications.
Vendor:Tusonix a Subsidiary of CTS Electronic Components Category:Filters
FILTER CERAMIC TCAS 1090MHZ SMDThis 4 pole monoblock filter KFF6402A is designed primarily for TCAS applications at 1090 MHz in the radionavigation band.
Vendor:Tusonix a Subsidiary of CTS Electronic Components Category:Filters
FILTER CERAMIC 915MHZ SMDThis 2 pole monoblock filter KFF6193A is primarily designed for ISM applications at 915 MHz.
Vendor:CTS Wireless Components Inc Category:Filters
FILTER CERAMIC 800MHZ SMDA high power duplexer suitable for trunking applications in the 800MHz band. KFF6169A
Vendor:Tusonix a Subsidiary of CTS Electronic Components Category:Filters
FILTER DUPLEXER CERM 837MHZ SMDA high power duplexer suitable for mobile applications in the 800MHz cellular band. KFF6075B
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:SO8;TO-252DPAKCuWire Pack:7850 D/C:ST Vendor:Other Category:Other
The KFxx series are very low drop regulators available in SO-8 package and in a wide range of output voltages.The very low drop voltage (0.4 V) and the very low quiescent current make them particularly suitable for lo...
Mfg:SO8;TO252DPAKAUBONDINGWIRES Pack:7850 D/C:ST Vendor:Other Category:Other
The KFxx series KF52B are very low drop regulators available in SO-8 package and in a wide range of output voltages.The very low drop voltage (0.4 V) and the very low quiescent current make them particularly suitable for...
Mfg:SO8;TO-252DPAKCuWire Pack:7850 D/C:ST Vendor:Other Category:Other
The KFxx series KF50B are very low drop regulators available in SO-8 package and in a wide range of output voltages.The very low drop voltage (0.4 V) and the very low quiescent current make them particularly suitable for...
Vendor:Other Category:Other
Mfg:SO8;TO-252DPAKCuWire Pack:7850 D/C:ST Vendor:Other Category:Other
The KFxx series KF40B are very low drop regulators available in SO-8 package and in a wide range of output voltages.The very low drop voltage (0.4 V) and the very low quiescent current make them particularly suitable for...
Mfg:SAMSUNG Pack:DIP Vendor:Other Category:Other
The KF353 is a JFET input operational amplifier with an internally compensated input offset voltage. The JFET input device provides wide bandwidth, low input bias currents and offset currents.
Mfg:FSC D/C:08+ Vendor:Other Category:Other
The KF351 is JFET input operational amplifier with an internally compensated input offset voltage. The JFET input device provides wide bandwidth, low input bias currents and offset currents.
Mfg:SAMSUNG Pack:DIP Vendor:Other Category:Other
The KF347 is a high speed quad JFET input operational amplifier. This feature high input impedance, wide bandwidth, high slew rate, and low input offset voltage and bias current. The KF347 may be used in circuits requiri...
Mfg:SO8;TO-252DPAKCuWire Pack:7850 D/C:ST Vendor:Other Category:Other
The KFxx series KF33B are very low drop regulators available in SO-8 package and in a wide range of output voltages.The very low drop voltage (0.4 V) and the very low quiescent current make them particularly suitable for...
Mfg:SGSTHOMSON Pack:DIP/SOP D/C:08+ Vendor:Other Category:Other
The KF00 series KF30BD are very Low Drop regulators availablein SO-8 package and in a wide range of output voltages. The very Low Drop voltage (0.4V) and the very low quiescent current make them particularly suitable fo...
Vendor:Other Category:Other
The KFxx series KF30B are very low drop regulators available in SO-8 package and in a wide range of output voltages.The very low drop voltage (0.4 V) and the very low quiescent current make them particularly suitable for...
Vendor:Other Category:Other
KF3008-GR16A is a thick film thermal head developed for A4 size printer for use with Kiosk & ATM terminals.
Vendor:Other Category:Other
The KF3008-GR10A is a A4-size thick-film thermal printhead, developed mainly for handy printers for personal computers.The KF3008-GR10A is completely compatible with the KF2008-GR10A (200 dpi) in shape.
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
KF3004-GL50A is developing type of GL40 series which are developed mainly for label printers.We have adopted low coefficient of abrasion and conductive protection coat to GL40 series which are possible for high speed and...
Vendor:Other Category:Other
KF3004-GF11A of low voltage thermal printheads have a 1.25-mm pitch connectors and reduced power supply circuitvoltage requirements. This makes them useful for a wide range of applications, including CAT, FET-POS and nat...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
KF3003-GL50A is developing type of GL40 series which are developed mainly for label printers.We have adopted low coefficient of abrasion and conductive protection coat to GL40 series which are possible for high speed and...
Vendor:Other Category:Other
Vendor:Other Category:Other
GM50 series KF3002-GM50A is the new product that newly added the future history control and driver LSI which has the function of thermal historical control, to GL50 series which is employing the convertional thick-film f...
Vendor:Other Category:Other
KF3002-GL50A is developing type of GL40 series which are developed mainly for label printe rs.We have adopted low coefficient of abrasion and conductive protection coat to GL40 series which are possible for high speed an...
Vendor:Other Category:Other
Mfg:ST Pack:SOP-8 D/C:99 Vendor:Other Category:Other
The KF00 series KF27BD are very Low Drop regulators availablein SO-8 package and in a wide range of output voltages. The very Low Drop voltage (0.4V) and the very low quiescent current make them particularly suitable fo...
Mfg:STMICROELECTRONICSSEMI Pack:DIP/SOP D/C:08+ Vendor:Other Category:Other
The KF00 series KF25BD are very Low Drop regulators availablein SO-8 package and in a wide range of output voltages. The very Low Drop voltage (0.4V) and the very low quiescent current make them particularly suitable fo...
Mfg:SO8;TO-252DPAKCuWire Pack:7850 D/C:ST Vendor:Other Category:Other
The KFxx series KF25B are very low drop regulators available in SO-8 package and in a wide range of output voltages.The very low drop voltage (0.4 V) and the very low quiescent current make them particularly suitable for...
Vendor:Other Category:Other
Vendor:Other Category:Other
The KF2010-GH10A is a standard type B4-size thick-film thermal printhead, developed mainly for facsimiles.
Vendor:Other Category:Other
The KF2008-GR10A is a A4-size thick-film thermal printhead, developed mainly for plain-paper fax machines and portable printers. The KF2008-GR10A and the KF2008GH10A are pin for pin compatible. This makes conversion of p...
Vendor:Other Category:Other
The KF2008-GK11A use a high durability protective film to accept top coated label sheet.This is a light and small thick film type thermal printhead which achieved 1 inch / s printing speed.
Vendor:Other Category:Other
The KF2008-GH40A is a standard type A4-size thick-film thermal printhead, developed mainly for facsimiles.
Vendor:Other Category:Other
The KF2008-GH10A is a standard type A4-size thick-film thermal printhead, developed mainly for facsimiles.
Vendor:Other Category:Other
GM50 series KF2006-GM50A is the new product that newly added the future history control and driver LSI which has the function of thermal historical control, to GL50 series which is employing the conventional thick-film f...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The KF2004-GR40A is ideal for applications that require compact, lightweight thermal printheads, such as POS and label printer applications. The 2-, 3-, and 4-inch sizes have a resolution of 203dpi. This series is suitab...
Vendor:Other Category:Other
GM50 series KF2004-GM50A is the new product that newly added the future history control and driver LSI which has the function of thermal historical control, to GL50 series which is employing the convertional thick-film f...
Vendor:Other Category:Other
The KF2004-GL50A is a 24 V standard thick film thermal printhead with a printing speed up to 6 inches / s that has been developed mainly for label printer use.
Vendor:Other Category:Other
The KF2004-GL41A is a 24 V standard thick film thermal printhead with a printing speed up to 6 inch / second that has been developed mainly for label printer use. (This product is a development product, so please contact...
Vendor:Other Category:Other
KF2004-GK42A is suitable for devices, such as high-speed POS and label printer applications, that require thermal printheads capable of higher printing rates. Improved power circuit design means that with heavier cur...
Vendor:Other Category:Other
The KF2004-GK10A uses a highly-durable conductive protective film to handle label papers with top-coatings. WithROHM's partial glaze construction, the KF2004-GK10A is a compact and lightweight thick-film thermal print he...
Vendor:Other Category:Other
The KF2004-GH10A is a compact and lightweight thick-film thermal printhead with a printing speed of 2 inches /second,developed mainly for ECRs.
Vendor:Other Category:Other
KF2004-GF84A of low voltage thermal printheads have a 1.25-mm pitch connectors and reduced power supply circuit voltage requirements. This makes them useful for a wide range of applications, including CAT, FET-POS and na...
Vendor:Other Category:Other
KF2004-GF60A of low voltage thermal printheads have a 1.25-mm pitch connectors and reduced power supply circuitvoltage requirements. This makes them useful for a wide range of applications, including CAT, FET-POS and nat...
Vendor:Other Category:Other
A world first, ROHM offers the KF2004-GF50A of thermal printheads that allow operation using a single standard lithium ion battery: required voltage has been reduced to just 2.7V. Compact and lightweight they are ide...
Vendor:Other Category:Other
Using its expertise in LSI technology, ROHM has developed new high density driver chips for use in the KF2004-GF41A .Capable of being employed for both thermal and thermal transfer printing, with a print speed of 200mm/s...
Vendor:Other Category:Other
The KF2004-GF10A is a standard type 5 V thermal printhead, developed mainly for handy printers. Maximum printing speed of 2 inch / second is possible.
Vendor:Other Category:Other
The KF2004-GE10A is a standard 12 V compact and lightweight thick-film thermal printhead, developed mainly for labelprinters. Maximum printing speed of 2 inch / second is possible with external simple history control.
Vendor:Other Category:Other
Using its expertise in LSI technology, ROHM has developed new high density driver chips for use in the KF2004-GD45A . Capable of being employed for both thermal and thermal transfer printing, with a print speed of 200mm/...
Vendor:Other Category:Other
The KF2004-GD10A is a standard 24 V thick-film thermal printhead with a printing speed of 4 inches / second, developed mainly for label printers. The GD series is of the glazed component type and therefore excellent for ...
Vendor:Other Category:Other
The KF2004-GC10A is a standard 24 V thick-film thermal printhead with a printing speed of 3 inches / second,developed mainly for label printers
Vendor:Other Category:Other
The KF2003-GR40A is ideal for applications that require compact, lightweight thermal printheads, such as POS and label printer applications. The 2-, 3-, and 4-inch sizes have a resolution of 203dpi. This series is suitab...
Vendor:Other Category:Other
GM50 series is the new product that newly added the future history control and driver LSI which has the function ofthermal historical control, to GL50 series which is employing the conventional thick-film fast response t...
Vendor:Other Category:Other
Vendor:Other Category:Other
The KF2003-GL41A is a 24 V standard thick film thermal printhead with a printing speed up to 6 inch / second that has been developed mainly for label printer use. (This product is a development product, so please contact...
Vendor:Other Category:Other
KF2003-GK42A is suitable for devices, such as high-speed POS and label printer applications, that require thermal printheads capable of higher printing rates. Improved power circuit design means that with heavier c...
Vendor:Other Category:Other
The KF2003-GK10A uses a highly-durable conductive protective film to handle label papers with top-coatings. WithROHM's partial glaze construction, the KF2003-GK10A is a compact and lightweight thick-film thermal print he...
Vendor:Other Category:Other
The KF2003-GH10A is a compact and lightweight thick-film thermal printhead with a printing speed of 2 inches / second,developed mainly for ECRs.
Vendor:Other Category:Other
KF2003-GF84A of low voltage thermal printheads have a 1.25-mm pitch connectors and reduced power supply circuitvoltage requirements. This makes them useful for a wide range of applications, including CAT, FET-POS and nat...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The KF2003-GF10A is a standard type 5 V thermal printhead, developed mainly for handy printers. Maximum printing speed of 2 inch / second is possible.
Vendor:Other Category:Other
The KF2003-GE10A is a standard type 12 V compact and lightweight thick-film thermal printhead, developed mainlyfor label printers. Maximum printing speed of 2 inch / second is possible with external simple history contro...
Vendor:Other Category:Other
Vendor:Other Category:Other
The KF2003-GD10A is a standard 24 V thick-film thermal printhead with a printing speed of 4 inches / second, eveloped mainly for label printers. The GD series is of the glazed component type and therefore excellent for t...
Vendor:Other Category:Other
The KF2003GC10A is a standard 24 V thick-film thermal printhead with a printing speed of 3 inches / second, developed mainly for label printers.
Vendor:Other Category:Other
The KF2002-GR40A is ideal for applications that require compact, lightweight thermal printheads, such as POS and label printer applications. The 2-, 3-, and 4-inch sizes have a resolution of 203dpi. This series is suitab...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The KF2002-GL50A is a 24 V standard thick film thermal printhead with a printing speed up to 6 inches / s that has been developed mainly for label printer use.
Vendor:Other Category:Other
The KF2002-GL41A is a 24 V standard thick film thermal printhead with a printing speed up to 6 inch / second that has been developed mainly for label printer use. (This product is a development product, so please contact...
Vendor:Other Category:Other
KF2002-GK42A is suitable for devices, such as high-speed POS and label printer applications, that require thermal printheads capable of higher printing rates. Improved power circuit design means that with heavier cur...
Vendor:Other Category:Other
The KF2002-GK10A uses a highly-durable conductive protective film to handle label papers with top-coatings. WithROHM's partial glaze construction, the KF2002-GK10A is a compact and lightweight thick-film thermal print he...
Vendor:Other Category:Other
The KF2002-GH10A is a compact and lightweight thick-film thermal printhead with a printing speed of 2 inches / second,developed mainly for ECRs.
Vendor:Other Category:Other
KF2002-GF94A of low voltage thermal printheads have a 1.25-mm pitch connectors and reduced power supply circuit voltage requirements. This makes them useful for a wide range of applications, including CAT, FET-POS and na...
Vendor:Other Category:Other
KF2002-GF84A of low voltage thermal printheads have a 1.25-mm pitch connectors and reduced power supply circuitvoltage requirements. This makes them useful for a wide range of applications, including CAT, FET-POS and nat...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The KF2002-GF10A is a standard type 5 V thermal printhead, developed mainly for handy printers. Maximum printing speed of 2 inch / second is possible.
Vendor:Other Category:Other
The KF2002-GE10A is a standard type 12 V compact and lightweight thick-film thermal printhead, developed mainly for label printers. Maximum printing speed of 2 inch / second is possible with external simple history contr...
Vendor:Other Category:Other
Vendor:Other Category:Other
The KF2002-GD10A is a standard 24 V thick-film thermal printhead with a printing speed of 4 inches / second, evelopedmainly for label printers. The GD series is of the glazed component type and therefore excellent for t...
Vendor:Other Category:Other
The KF2002-GC10A is a standard 24 V thick-film thermal printhead with a printing speed of 3 inches / second, eveloped mainly for label printers.
Vendor:Other Category:Other
The KF00 series KF15BD are very Low Drop regulators availablein SO-8 package and in a wide range of output voltages. The very Low Drop voltage (0.4V) and the very low quiescent current make them particularly suitable fo...
Mfg:SO8;TO-252DPAKCuWire Pack:7850 D/C:ST Vendor:Other Category:Other
The KFxx series KF15B are very low drop regulators available in SO-8 package and in a wide range of output voltages.The very low drop voltage (0.4 V) and the very low quiescent current make them particularly suitable for...
Vendor:Other Category:Other
Vendor:Other Category:Other
These compact, lightweight printheads KF1502-GT10A have low power requirements and are intended for ECR and mobile applications. Drawing 7.2V, a maximum print speed of 2 inches per second is possible.
© 2008-2012 SeekIC.com Corp.All Rights Reserved.