Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The W83194R-58A is a Clock Synthesizer for VIA chipset. W83194R-58A provides all clocks required for high-speed RISC or CISC microprocessor such as Intel PentiumII and also provides 16 different frequencies of CPU clocks by software setting. AGP and PCI clocks are externally selectable with smooth transitions. The W83194R-58A provides AGP clocks especially for clone chipset, and makes SDRAM in synchronous frequency with CPU or AGP clocks.
The W83194R-58A provides I2C serial bus interface to program the registers to enable or disable each clock outputs and choose the 0.25%, 0.5% or 0.5%,1.5% center type spread spectrum to reduce EMI.
The W83194R-58A accepts a 14.318 MHz reference crystal as its input and runs on a 3.3V supply. High drive PCI and SDRAM CLOCK outputs typically provide greater than 1 V /ns slew rate into 30 pF loads. CPU CLOCK outputs typically provide better than 1 V /ns slew rate into 20 pF loads when maintaining 50± 5% duty cycle. The fixed frequency outputs as REF, 24MHz, and 48 MHz provide better than 0.5V /ns slew rate.
W83194R-58A Features
· Supports Pentium™, Pentium™Pro, Pentium™ II, AMD and Cyrix CPUs with I2C. · 4 CPU clocks · 12 SDRAM clocks for 3 DIMs · Two AGP clocks · 6 PCI synchronous clocks. · Optional single or mixed supply: (Vdd = Vddq3 = Vddq2 = Vddq2b = 3.3V) or (Vdd = Vddq3 = Vddq2 = 3.3V, Vdq2b = 2.5V) · Skew form CPU to PCI clock -1 to 4 ns, center 2.6 ns, AGP to CPU sync. skew 0 ns (250 ps) · SDRAM frequency synchronous to CPU or AGP clocks · Smooth frequency switch with selections from 60 to 100 MHz CPU(-37) and 66 to 150MHz(-58) · I2C 2-Wire serial interface and I2C read back · 0~0.5% down type and 0.25%, 0.5% center type spread spectrum to reduce EMI · Programmable registers to enable/stop each output and select modes (mode as Tri-state or Normal ) · MODE pin for power Management · 48 MHz for USB · 24 MHz for super I/O · 48-pin SSOP package