UMA1015M, UMA1015M/C2, UMA1015M/C2/S2 Selling Leads, Datasheet
MFG:PHILIPS Package Cooled:SSOP20 D/C:2004
UMA1015M, UMA1015M/C2, UMA1015M/C2/S2 Datasheet download
Part Number: UMA1015M
MFG: PHILIPS
Package Cooled: SSOP20
D/C: 2004
MFG:PHILIPS Package Cooled:SSOP20 D/C:2004
UMA1015M, UMA1015M/C2, UMA1015M/C2/S2 Datasheet download
MFG: PHILIPS
Package Cooled: SSOP20
D/C: 2004
Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
TOP
PDF/DataSheet Download
Datasheet: UMA1015M
File Size: 235214 KB
Manufacturer: PHILIPS [Philips Semiconductors]
Download : Click here to Download
PDF/DataSheet Download
Datasheet: UMA1015M/C2
File Size: 235214 KB
Manufacturer: PHILIPS [Philips Semiconductors]
Download : Click here to Download
PDF/DataSheet Download
Datasheet: UMA0204
File Size: 111715 KB
Manufacturer: VISAY [Vishay Siliconix]
Download : Click here to Download
The UMA1015M is a low-power dual frequency synthesizer for radio communications which operates in the 50 to 1100 MHz frequency range. Each synthesizer consists of a fully programmable main divider, a phase and frequency detector and a charge pump. There is a fully programmable reference divider common to both synthesizers which operates up to 35 MHz. The device is programmed via a 3-wire serial bus which operates up to 10 MHz. The charge pump currents (gains) are fixed by an external resistance at pin 20 (ISET). The BiCMOS device is designed to operate from 2.6 V (3 Ni-Cd cells) to 5.5 V at low current. Digital supplies VDD1 and VDD2 must be at the same potential. The charge pump supply (VCC) can be provided by an external source or on-chip voltage doubler. VCC must be equal to or higher than VDD1. Each synthesizer can be powered-down independently via the serial bus to save current. It is also possible to power-down the device via the HPD input (pin 5).