SA6170K, SA620, SA6200K Selling Leads, Datasheet
MFG:PHILIPS Package Cooled:www.dayue-hk.com D/C:09+ ROHS
SA6170K, SA620, SA6200K Datasheet download
Part Number: SA6170K
MFG: PHILIPS
Package Cooled: www.dayue-hk.com
D/C: 09+ ROHS
MFG:PHILIPS Package Cooled:www.dayue-hk.com D/C:09+ ROHS
SA6170K, SA620, SA6200K Datasheet download
MFG: PHILIPS
Package Cooled: www.dayue-hk.com
D/C: 09+ ROHS
Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
TOP
PDF/DataSheet Download
Datasheet: SA6.0
File Size: 442040 KB
Manufacturer: BYTES [Bytes]
Download : Click here to Download
PDF/DataSheet Download
Datasheet: SA620
File Size: 339942 KB
Manufacturer: PHILIPS [Philips Semiconductors]
Download : Click here to Download
PDF/DataSheet Download
Datasheet: SA6.0
File Size: 442040 KB
Manufacturer: BYTES [Bytes]
Download : Click here to Download
The SA620 is a combined RF amplifier, VCO with tracking bandpass filter and mixer designed for high-performance low-power communication systems from 800-1200MHz. The low-noise preamplifier has a 1.6dB noise figure at 900MHz with 11.5dB gain and an IP3 intercept of -3dBm at the input. The gain is stabilized by on-chip compensation to vary
less than ±0.2dB over -40 to +85°C temperature range. The wide-dynamic-range mixer has an 9dB noise figure and IP3 of 6dBm at the input at 900MHz. An external LO can be used in place of the internal VCO for improved mixer input IP3 and a 3mA reduction in current. The chip incorporates a through-mode option so the RF amplifier can be disabled and replaced by an attenuator (S21 = 7.5dB). This is useful for improving the overall dynamic range of the receiver when in an overload situation. The nominal current drawn from a single 3V supply is 10.4mA and 7.2mA in the thru-mode. Additionally, the VCO and Mixer can be powered down to further reduce the supply current to 1.2mA.
SYMBOL | PARAMETER | RATING | UNITS |
VCC |
Supply voltage1 | -0.3 to +6 | V |
VIN | Voltage applied to any other pin | -0.3 to (VCC + 0.3) | V |
PD | Power dissipation, TA = 25°C (still air)2 20-Pin Plastic SSOP |
980 | mW |
TJMAX | Maximum operating junction temperature | 150 | °C |
PMAX | Maximum power input/output | +20 | dBm |
TSTG | Storage temperature range | 65 to +150 | °C |