Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The PVN012 Series Photovoltaic Relay at 100 milliohms features the lowest possible on-state resistance in a miniature package - lower than a comparable reed relay.
The PVN012 is a single-pole, normally open solidstate relay. It utilizes a GenerationV HEXFET output switch, driven by an integrated circuit photovoltaic generator of novel construction. The output switch is controlled by radiation from a GaAlAs light emitting diode (LED) which is optically isolated from the photovoltaic generator.
These units exceed the performance capabilities of electromechanical relays in life, sensitivity, stable onresistance, miniaturization, magnetic insensitivity and ruggedness. They are ideally suited for switching high currents or low level signals without distortion or injection of electrical noise.
Series PVN012 Relays are packaged in a 6-lead molded DIP package with either through-hole or surface mount (gull-wing) terminals. They are available in standard plastic shipping tubes or on tapeand- reel. Please refer to part identification informatio opposite.
Maximum Lead Soldering Temperature (1.6mm below seating plane for 10 sec.)
260
°C
Ambient Temperature Range:
Operating
-40 to +85
°C
Storage
-40 to +100
PVN012S Features
100m On-Resistance GenV HEXFET output Bounce-free operation 2.5 - 4.5 Amp capacity Linear AC/DC operation 4,000 VRMS I/O isolation Solid-State reliability UL recognized and CSA certified ESD Tolerance: 4000V Human Body Model 500V Machine Model
PVN012S Typical Application
Portable Electronics Programmable Logic Controllers Computers and Peripheral Devices Audio Equipment Power Supplies and Power Distribution Instrumentation
PVN012S-T Parameters
Technical/Catalog Information
PVN012S-T
Vendor
International Rectifier
Category
Relays
Mounting Type
Surface Mount
Termination Style
Gull Wing
Package / Case
6-SMD (300 mil)
Circuit
SPST-NO (1 Form A)
Load Current
2.5A
Voltage - Input
1.2VDC
Voltage - Load
0 ~ 20 V
Output Type
AC, DC
On-State Resistance
100 mOhm
Lead Free Status
Contains Lead
RoHS Status
RoHS Non-Compliant
Other Names
PVN012S T PVN012ST
PVN012S-T General Description
The PVN012 Series Photovoltaic Relay at 100 milliohms features the lowest possible on-state resistance in a miniature package - lower than a comparable reed relay.
The PVN012 is a single-pole, normally open solidstate relay. It utilizes a GenerationV HEXFET output switch, driven by an integrated circuit photovoltaic generator of novel construction. The output switch is controlled by radiation from a GaAlAs light emitting diode (LED) which is optically isolated from the photovoltaic generator.
These units exceed the performance capabilities of electromechanical relays in life, sensitivity, stable onresistance, miniaturization, magnetic insensitivity and ruggedness. They are ideally suited for switching high currents or low level signals without distortion or injection of electrical noise.
Series PVN012 Relays are packaged in a 6-lead molded DIP package with either through-hole or surface mount (gull-wing) terminals. They are available in standard plastic shipping tubes or on tapeand- reel. Please refer to part identification informatio opposite.
Maximum Lead Soldering Temperature (1.6mm below seating plane for 10 sec.)
260
°C
Ambient Temperature Range:
Operating
-40 to +85
°C
Storage
-40 to +100
PVN012S-T Features
100m On-Resistance GenV HEXFET output Bounce-free operation 2.5 - 4.5 Amp capacity Linear AC/DC operation 4,000 VRMS I/O isolation Solid-State reliability UL recognized and CSA certified ESD Tolerance: 4000V Human Body Model 500V Machine Model
PVN012S-T Typical Application
Portable Electronics Programmable Logic Controllers Computers and Peripheral Devices Audio Equipment Power Supplies and Power Distribution Instrumentation
PVN013 General Description
The PVN013 SERIES Photovoltaic Isolator is a dualchannel, opto-isolated driver capable of directly driving gates of power MOSFETs or IGBTs. It utilizes a monolithic integrated circuit photovoltaic generator of novel construction as its output. The output is controlled by radiation from a GaAlAs light emitting diode (LED) which is optically isolated from the photovoltaic generator.
The PVN013 SERIES is ideally suited for applications requiring high-current and/or high voltage switching with optical isolation between the low-level driving circuitry and high-energy or high- voltage load circuits.
It can be used for directly driving gates of power MOSFETs. The dual- channel configuration allows its outputs to drive independent discrete power MOSFETs, or be connected in parallel or in series to\ provide higher-current drive for power MOSFETs or higher-voltage drive for IGBTs. PVN013 SERIES employs a fast turn-off circuitry.
PVN013 SERIES Photovoltaic Isolators are packaged in an 8-pin, molded DIP package with either thru-hole or "gull-wing" terminals. It is available in standard plastic hipping tubes or on tape-and-reel. Refer to Part Identification information.
PVN013 Features
` 100m On-Resistance ` GenV HEXFET output ` Bounce-free operation ` 2.5 - 4.5 Amp capacity ` Linear AC/DC operation ` 4,000 VRMS I/O isolation ` Solid-State reliability ` UL recognition pending ` ESD Tolerance: 4000V Human Body Model 500V Machine Model
PVN013 Typical Application
· Portable Electronics · Industrial Control · Computers and Peripheral Devices · Audio Equipment · Power Supplies and Power Distribution · Instrumentation