Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The OPB780Z color sensor uses a light-to-frequency converter that combines 64 configurable silicon photodiodes (on a 144 um center and measuring 120 um x 120 um each), with a white LED in a small, lightweight package that makes it ideal for using in miniature applications.
The output is a square wave (50% duty cycle) with a frequency directly proportional to reflected light intensity (irradiance).
The light-to-frequency converter reads an 8 x 8 array of photodiodes that consists of four groups of 16 photodiodes each, segregated by color: 16 photodiodes with red filters, 16 photodiodes with green filters, 16 photodiodes with blue filters and 16 clear photodiodes with no filters. Each color's group of 16 photodiodes is interdigitated to minimize the effect of non-uniformity of the incident irradiance. Each color's group is also connected in parallel. The type of photodiode used during operation is pin-selectable.
The output of the device is designed to drive a standard TTL or CMOS logic input over short distances.
The internal photodiode used by the device is controlled by two logic inputs, S2 and S3. See page 4 for more information.
A 10 " [25.4 cm] Flat Flexible Cable (FFC) is included for easy hook-up. The FFC is designed to interface with an AVX (ELCO) part number 04 6249 0080 00 800 connector.
For more information, contact your local representative or OPTEK.
OPB780Z Maximum Ratings
Absolute Maximum Ratings1, 2 (TA = 25 unless otherwise noted)
Operating Temperature
TOPR = -30to +85
Storage Temperature
TSTG = -30 to +85
LED-Absolute Maximum Ratings1, 2 (TA = 25 unless otherwise noted)
Reverse Voltage
VR = 5 V
Forward Current
IF = 30 mA
Power Dissipation
PD = 120 mW
Peak Forward Current
IFP = 100 mA
Sensor-Absolute Maximum Ratings1, 2 (over operating free-air temperature range unless otherwise noted)
Supply Voltage(VDD)
6 V
Input Voltage (all inputs, VI)
-0.3 V to VDD + 0.3 V
Notes: (1) Stresses beyond those linked under "absolute maximum rating" may cause permanent damage to device. These are only stress ratings, and functional operating of the device at these (or any other) conditions beyond those indicated in the Recommended Operating Conditions table shown above may affect the device's reliability. (2) All voltage values are with respect to GND.
OPB780Z Features
• High-resolution conversion of light intensity to frequency • Selectable color output frequency • Communicates directly with a microcontroller • Sensor power supply operation (2.7 V to 5.5 V) • LED power separate input • Includes LED, Sensor and interface cable
OPB780Z Typical Application
• Photographic equipment • Colormetry • Chemical analyzers • Display contrast controls • High resolution digital measurement of light intensity