Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
only 150 A with a 1.0 mA load. This part is ideal for any and all battery operated microprocessor equipment.
Microprocessor control logic includes an active reset output RO with delay and a SI/SO monitor which can be used to provide an early warning signal to the microprocessor of a potential impending reset signal. The use of the SI/SO monitor allows the microprocessor to finish any signal processing before the reset shuts the microprocessor down.
The active Reset circuit operates correctly at an output voltage as low as 1.0 V. The Reset function is activated during the power up sequence or during normal operation if the output voltage drops outside the regulation limits.
The reset threshold voltage can be decreased by the connection of an external resistor divider to the RADJ lead. The regulator is protected against reverse battery, short circuit, and thermal overload conditions.
The device can withstand load dump transients making it suitable for use in automotive environments. The device has also been optimized for EMC conditions.
If the application requires pullup resistors at the logic outputs Reset and Sense Out, the NCV4269 with integrated resistors can be used.
NCV4279 Maximum Ratings
Parameter
Symbol
Min
Max
Unit
Input to Regulator
VI II
−40 Internally Limited
45 Internally Limited
V
Input Peak Transient Voltage
VI
−
60
V
Sense Input
VSI ISI
−40 −1
45 1
V mA
Reset Threshold Adjust
VRADJ IRADJ
−0.3 −10
7 10
V mA
Reset Delay
VD ID
−0.3 Internally Limited
7 Internally Limited
V
Ground
Iq
50
−
mA
Reset Output
VRO IRO
−0.3 Internally Limited
7 Internally Limited
V
Sense Output
VSO ISO
−0.3 Internally Limited
7 Internally Limited
V
Regulated Output
VQ IQ
−0.5 −10
7.0 −
V mA
Junction Temperature Storage Temperature
TJ TSTG
− −50
150 150
°C °C
Input Voltage Operating Range Junction Temperature Operating Range
VI TJ
− −40
45 150
V °C
Junction−to−Ambient Thermal Resistance SO−8 SO−14
RJA
−
200 70
k/W
Junction−to−Pin 4, all GND Pins Grounded. SO−14
RJP
−
30
k/W
NCV4279 Features
• 5.0 V ± 2.0% Output • Low 150 A Quiescent Current • Active Reset Output Low Down to VQ = 1.0 V • Adjustable Reset Threshold • 150 mA Output Current Capability • Fault Protection ♦ +60 V Peak Transient Voltage ♦ −40 V Reverse Voltage ♦ Short Circuit ♦ Thermal Overload • Early Warning through SI/SO Leads • Internally Fused Leads in SO−14 Package • Very Low Dropout Voltage • Electrical Parameters Guaranteed Over Entire Temperature Range • Pb−Free Packages are Available • NCV Prefix for Automotive and Other Applications Requiring Site and Control Changes