ID226020, ID226075, ID2260A2 Selling Leads, Datasheet
MFG:PRX Package Cooled:MITS D/C:09+
ID226020, ID226075, ID2260A2 Datasheet download
Part Number: ID226020
MFG: PRX
Package Cooled: MITS
D/C: 09+
MFG:PRX Package Cooled:MITS D/C:09+
ID226020, ID226075, ID2260A2 Datasheet download
MFG: PRX
Package Cooled: MITS
D/C: 09+
Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
TOP
PDF/DataSheet Download
Datasheet: ID200
File Size: 74967 KB
Manufacturer: MICROSEMI [Microsemi Corporation]
Download : Click here to Download
PDF/DataSheet Download
Datasheet: ID200
File Size: 74967 KB
Manufacturer: MICROSEMI [Microsemi Corporation]
Download : Click here to Download
PDF/DataSheet Download
Datasheet: ID200
File Size: 74967 KB
Manufacturer: MICROSEMI [Microsemi Corporation]
Download : Click here to Download
The ID226075 has the following features including low drive power;discrete super-fast recovery free wheel diode;high frequency operation;isolated base plate for easy heat sinking.
The ID226075 is a fully static CMOS 8051 compatible microcontroller designed for high performance. While remaining familiar to 8051 users, it has many new fea- tures. In general, software written for existing 8051 based systems works without modification on the ID226075. The exception is critical timing since the High Speed Micro performs its instructions much faster than the original for any given crystal selection. The ID226075 runs the standard 8051 instruction set. It is not pin compatible with other 8051s due to the time- keeping crystal.
The power supply of the device must start its ramp from 0.0 V. Functional operating conditions are provided with the DC electrical specifications in Table 5. Absolute maximum ratings are stress ratings only; functional operation at the maxima is not guaranteed. Stresses beyond those listed may affect device reliability or cause permanent damage to the device. Caution: All inputs that tolerate 5 V cannot be more than 2.5 V greater than VDDH. This restriction applies to power-up and normal operation (that is, if the MPC852T is unpowered, a voltage greater than 2.5 V must not be applied to its inputs). Guaranteed by design. Not production tested. All digital inputs (DB_, A_, WR, CS, LDAC, and CLR) at GND or VCC potential. All digital inputs (DB_, A_, WR, CS, LDAC, and CLR) at +0.8V or +2.4V. All digital inputs (DB0 to DB13) transition from GND to VCC with WR = VCC.
Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document.