HDMP-0440, HDMP0450, HDMP-0450 Selling Leads, Datasheet
MFG:Agilent Package Cooled:QFP D/C:0037+
HDMP-0440, HDMP0450, HDMP-0450 Datasheet download
Part Number: HDMP-0440
MFG: Agilent
Package Cooled: QFP
D/C: 0037+
MFG:Agilent Package Cooled:QFP D/C:0037+
HDMP-0440, HDMP0450, HDMP-0450 Datasheet download
MFG: Agilent
Package Cooled: QFP
D/C: 0037+
Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
TOP
PDF/DataSheet Download
Datasheet: HDMP-0440
File Size: 277941 KB
Manufacturer: HP [Agilent(Hewlett-Packard)]
Download : Click here to Download
PDF/DataSheet Download
Datasheet: HDM08216L-3
File Size: 27965 KB
Manufacturer: ETC [ETC]
Download : Click here to Download
PDF/DataSheet Download
Datasheet: HDMP-0450
File Size: 275972 KB
Manufacturer: HP [Agilent(Hewlett-Packard)]
Download : Click here to Download
The HDMP-0440 is a Quad Port Bypass Circuit (PBC), which provides a low-cost, low-power physical-layer solution for Fibre Channel Arbitrated Loop (FC-AL) disk array configurations. By using a PBC such as the HDMP-0440, hard disks may be pulled out or swapped while other disks in the array are available to the system.
A PBC consists of multiple 2:1 multiplexers daisy chained together. Each port has two modes of operation: "disk in loop" and "disk bypassed." When the "disk in loop" mode is selected, the loop goes into and out of the disk drive at that port. For example, data goes from the HDMP-0440's TO_NODE[n]± differential output pins to the Disk Drive Transceiver IC's (e.g. an HDMP-1636A) Rx differential input pins. Data from the Disk Drive Transceiver IC's Tx differential outputs goes to the HDMP-0440's FM_NODE[n]± differential input pins.
Figure 2 shows connection diagrams for disk drive array applications. When the "disk bypassed" mode is selected, the disk drive is either absent or non-functional and the loop bypasses the hard disk. The "disk bypassed" mode is enabled by pulling the BYPASS[n]- pin low. Leave BYPASS[n]- floating to enable the "disk in loop" mode. HDMP- 0440s may be cascaded with other members of the HDMP- 04XX/HDMP-05XX family through the appropriate FM_NODE[n]± and TO_NODE[n]± pins to accommodate any number of hard disks (see Figure 3). The unused cells in the HDMP-0440 may be bypassed by using pulldown resistors on the BYPASS[n]- pins for these cells. An HDMP-0440 may also be configured as five 1:1 buffers, as two 2:1 multiplexers or as two 1:2 buffers.
SYMBOL | Parameter | Units | MIN | MAX |
VCC | Supply Voltage | V | -0.5 | 4.0 |
VIN,LVTTL | LVTTL Input Voltage | V | -0.5 | VCC + 0.5[1] |
VIN,HS_IN | HS_IN Input Voltage (Differential) | mA | 200 | 2000 |
IO,LVTTL | LVTTL Output Sink/Source Current | mA | ±13 | |
Tstg | Storage Temperature | °C | -65 | +150 |
TJ | Junction temperature | °C | 0 | +125 |
The HDMP-0450 is a Quad Port Bypass Circuit (PBC) which provides a low-cost, low-power physical-layer solution for Fibre Channel Arbitrated Loop (FC-AL) disk array configurations. By using a PBC such as the HDMP-0450, hard disks may be pulled out or swapped while other disks in the array are available to the system.
A PBC consists of multiple 2:1 multiplexers daisy chained together. Each port has two modes of operation: "disk in loop" and "disk bypassed." When the "disk in loop" mode is selected, the loop goes into and out of the disk drive at that port. For example, data goes from the HDMP-0450's TO_NODE[n]± differential output pins to the Disk Drive Transceiver IC's (e.g., an HDMP-1636A) Rx differential input pins. Data from the Disk Drive Transceiver IC's Tx differential outputs goes to the HDMP-0450's FM_NODE[n]± differential inputpins.
Figure 2 shows connection diagrams for disk drive array applications. When the "disk bypassed" mode is selected, the disk drive is either absent or nonfunctional and the loop bypasses the hard disk. The "disk bypassed" mode is enabled by pulling the BYPASS[n]- pin low. Leave BYPASS[n]- floating to enable the "disk in loop" mode. HDMP-0450s may be cascaded with other members of the HDMP-04XX/HDMP-05XX family through the appropriate FM_NODE[n]± and TO_NODE[n]± pins to accommodate any number of hard disks (see Figure 3). The unused cells in the HDMP-0450 may be bypassed by using pulldown resistors on the BYPASS[n]- pins for these cells.
An HDMP-0450 may also be configured as five 1:1 buffers, as two 2:1 multiplexers, or as two 1:2 buffers.
Symbol | Parameter | Units | Min. | Max. |
vcc | Supply Voltage | V | -0.5 | 4.0 |
VIN,LVTTL | LVTTL Input Voltage | V | -0.5 | VCC + 0.5[1] |
VIN,HS_IN | HS_IN Input Voltage (Differential) | mV | 200 | 2000 |
IO,LVTTL | LVTTL Output Sink/Source Current | mA | +13 | |
Tstg | Storage Temperature | °C | -65 | +150 |
Tj | Junction Temperature | °C | 0 | +125 |
Note: 1. Must remain less than or equal to absolute maximum VCC voltage of 4.0 V. |