Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
CHATEAU - Channelized T1 and E1 And Universal HDLC Controller
DS3134 Maximum Ratings
Voltage on Any Lead with Respect to VSS (except VDD) ...............-0.3V to 5.5V Supply Voltage (VDD) with Respect to VSS .................................-0.3V to 3.63V Operating Temperature ...................................................................0C to +70C Storage Temperature .................................................................-55C to +125C Soldering Temperature ..................................... ..See J-STD-020A specification
DS3134 Features
256-Independent Bidirectional HDLC Channels
16 Physical Ports, Each Supporting up to Four T1 or E1 Lines
A Total of 64 T1/E1 Links
Two Fast Ports Capable of Speeds up to 52Mbps
All Other Ports Capable of Speeds up to 10Mbps
104Mbps Full Duplex Throughput
Per-HDLC-Channel Diagnostic Loopbacks in Both Directions
Onboard Bit Error Rate Tester (BERT)
Large 16kB FIFO in Both the Receive and Transmit Directions
Efficient Scatter/Gather DMA
Local Bus Access, for Control or to Bridge From the PCI Bus
32-bit 33MHz PCI Backplane Interface
Operating Range:
3V Operation With 5V Tolerant I/O
DS3134 Typical Application
DS3134 Datasheet
DS3143 General Description
The DS3141, DS3142, DS3143, and DS3144 (DS314x) devices include all necessary circuitry to frame and format up to four separate DS3 or E3 channels. Each framer in these devices is independently configurable to support M23 DS3, C-Bit Parity DS3, or G.751 E3. The framers interface to a variety of line interface units (LIUs),microprocessor buses, and other system components without glue logic. Each DS3/E3 framer has its own HDLC controller, FEAC controller, and BERT, as well as full support for error detection and generation, performance monitoring, and loopbacks.
DS3143 Maximum Ratings
Voltage Range on Any Input, Bidirectional or Open Drain Output Lead with Respect to VSS -0.3V to...................................................................... +5.5V Supply Voltage Range (VDD) with Respect to VSS............... -0.3V to +3.63V Ambient Operating Temperature Range................................. -40 to +85 Junction Operating Temperature Range................................-40 to +125 Storage Temperature Range................................................ -55 to +125 Soldering Temperature Range ............................See IPC/JEDEC J-STD-020A
DS3143 Features
One/Two/Three/Four Independent DS3/E3 Framers on a Single Die Framing and Formatting to M23 DS3, C-Bit Parity DS3, and G.751 E3 LIU Interface can be Binary (NRZ) or Dual-Rail (POS/NEG) B3ZS/HDB3 Encoder and Decoder Generate and Detect DS3/E3 Alarms Integrated HDLC Controller for Each Channel Integrated FEAC Controller for Each Channel Integrated Bit Error-Rate Tester (BERT) for Each Channel Large Performance-Monitoring Counters Line, Diagnostic, and Payload Loopbacks Externally Controlled Transmit Overhead Insertion Port Support External Timing or Loop-Timing Framers can be Powered Down When Not Used 8-Bit Processor Port Supports Muxed or Nonmuxed Bus Operation (Intel or Motorola) 3.3V Supply with 5V Tolerant I/O 144-Pin, 13mm x 13mm CSBGA Package IEEE 1149.1 JTAG Support
DS3143 Typical Application
SONET/SDH Muxes PDH Muxes Digital Cross-Connect Systems Access Concentrators ATM and Frame Relay EquipmentRouters