Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
AT83C5127 product is high-performance CMOS derivatives of the 80C51 8-bit microcontrollers designed for USB smart card reader applications.
The AT83C5127 is a low pin count of the AT8xC5122 and is proposed in ROM version. The ROM device is only factory programmable.
AT83C5127 Features
• Clock Controller 80C51 core with 6 clocks per instruction 8 MHz On-Chip Oscillator PLL for generating 96 MHz clock to supply CPU core, USB and Smart Card Interfaces Programmable CPU clock from 500 kHz / X1 to 48 MHz / X1 • Reset Controller Power On Reset (POR) feature avoiding an external reset capacitor Power Fail Detector (PFD) Watch-Dog Timer • Power Management Two power saving modes: Idle and Power Down Four Power Down Wake-up Sources: Smart Card Detection, Keyboard Interrupt, USB Resume, External Interrupt Input Voltage Range: 4.5V - 5.5V Core's Power Consumption (Without Smart Card and USB): •30 mA Maximum Operating Current @ 48 MHz / X1 •200 µA Maximum Power-down Current @ 5.5V • Interrupt Controller up to 7 interrupt sources up to 4 Level Priority • Memory Controller Internal Program memory: up to 16 Kbytes of ROM Internal Data Memory : 768 bytes including 256 bytes of data and 512 bytes of XRAM • Two 16-bit Timer/Counters • USB 2.0 Full Speed Interface 48 MHz DPLL On-Chip 3.3V USB voltage regulator and transceivers Software detach feature 7 endpoints programmable with In or out directions and ISO, Bulk or Interrupt Transfers : •Endpoint 0: 32 Bytes Bidirectionnal FIFO for Control transfers •Endpoints 1,2,3: 8 bytes FIFO •Endpoints 4,5: 64 Bytes FIFO •Endpoint 6: 2*64 bytes FIFO with Pin-Pong feature • ISO 7816 UART Interface Fully Compliant with EMV2000, GIE-CB and WHQL Standards Programmable ISO clock from 1 MHz to 4.8 MHz Card insertion/removal detection with automatic deactivation sequence Programmable Baud Rate Generator from 372 to 11.625 clock pulses Synchronous/Asynchronous Protocols T=0 and T=1 with Direct or Inverse Convention Automatic character repetition on parity errors 32 Bit Waiting Time Counter 16 Bit Guard Time Counter Internal Step Up/Down Converter with Programmable Voltage Output: •1.8V-30mA, 3V-50mA and 5V-60mA Current overload protection 6 kV ESD (MIL/STD 833 Class 3) protection on whole Smart Card Interface • Alternate Smart Card Interface with CLK, IO and RST • UART Interface with Integrated Baud Rate Generator (BRG) • Four 12 I/O bit Ports Up to four LED outputs with 3 level programmable current source: 2, 4 and 10 mA Two General Purpose I/O programmable as external interrupts • Packages VQFP32, QFN32, Die