Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The LM1578 is a switching regulator which can easily be set up for such DC-to-DC voltage conversion circuits as the buck, boost, and inverting configurations. The LM1578 features a unique comparator input stage which not only has separate pins for both the inverting and non-inverting inputs, but also provides an internal 1.0V reference to each input,thereby simplifying circuit design and p.c. board layout. The output can switch up to 750mA and has output pins for its collector and emitter to promote design flexibility. An external current limit terminal may be referenced to either the ground or the Vin terminal, depending upon the application. In addition, the LM1578 has an on board oscillator, which sets the switching frequency with a single external capacitor from < 1Hz to 100kHz (typical).
6372 Maximum Ratings
Total Supply Voltage 40V Collector Output to Ground -0.3V to +40V Emitter Output to Ground (Note 2) -1V to +40V Power Dissipation (Note 3) Internally Limited Output Current 750mA Storage Temperature -65 C to +150 C Lead Temperature (Soldering, 10 seconds) 300 C Maximum Junction Temperature 150 C ESD Tolerance (Note 4) 4kV Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. DC and AC electrical specifications do not apply when operating the device beyond its rated operating conditions.
Note 2: For Tj > 100 C, the Emitter pin voltage should not be driven more than 0.6V below ground (see Application Information).
Note 3: At elevated temperatures, devices must be derated based on package thermal resistance. The device in the TO-99 package must be derated at 150 C/W, junction to ambient, or 45 C/W junction to case. The device in the 8-pin DIP must be derated at 95 C/W, junction to ambient.
Note 4: Human body model, 1.5k Ohm in series with 100pF.
6372 Features
- Inverting and non-inverting feedback inputs - 1.0V reference at inputs - Operates from supply voltages of 2V to 40V - Output current up to 750mA, saturation less than 0.9V - Current limit and thermal shut down - Duty cycle up to 90%
6372 Typical Application
- Switching regulators in buck, boost, inverting, and single-ended transformer configuration - Motor speed control - Lamp flasher