2F8723P, 2FAD-C20R, 2FAF-M8R

The 2FAD-C20R devices, manufactured using Thin Film On Silicon technology provide ESD protection and EMI filtering for the data port of portable electronic devices such as cell phones, modems and PDAs. The device incorporates six low pass filter channels. Each channel has a series 100 ohm resistor assuring a minimum of  -30 dB attenuation from 800 MHz to 3 GHz. The device is suitable for EMI filtering of GSM, CDMA, W-CDMA, WLAN and Bluetooth frequencies.

Each external port of the six channels includes a back-to-back 6.5 Volt Zener diode for ESD protection. Two additional standalone 6.5 Volt Zener diodes are available for ESD protection on power lines or USB data ports. The ESD protection provided by the component enables an eight line data port to withstand a minimum ±8 K Contact / ±15 KV Air Discharge when tested according test the ESD method specified in IEC 61000-4-2. The device measures 2.04 mm x 2.64 mm and is available in a 20 pin (4 x 5 array) CSP package intended to be mounted directly onto an FR4 printed circuit board. The CSP device meets typical thermal cycle and bend test specifications without the use of an underfill material.

The 2FAF-M8R device, manufactured using Thin Film on Silicon technology, provides ESD protection for the external ports of portable electronic devices such as cell phones, notebooks and PDAs.

The ESD protection provided by the component enables a data port to withstand a minimum ±8 KV Contact / ±15 KV Air Discharge per the ESD test method specified in IEC 61000-4-2. The device measures 2 mm x 2 mm and can be mounted directly onto an FR4 printed circuit board. The device meets typical thermal cycle and bend test specifications without the use of an underfill material.