Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
These quad Darlington arrays are designed to serve as interface between low-level logic and peripheral power devices such as sole-noids, motors, incandescent displays, heaters, and similar loads of up to 320 W per channel. Both integrated circuits include transient-suppres- sion diodes that enable usewith inductive loads. The input logic is compatible with most TTL, DTL, LSTTL, and 5 V CMOS logic.
Type UDN2878W and UDN2879W 4 A arrays are identical excep for output-voltage ratings. The former is rated for operation to 50 V(35 V sustaining), while the latter has a minimum output breakdown rating of 80 V (50 V sustaining). The lower-cost UDN2879W-2 is recommended for applications requiring load currents of 3 A or less. These less expensive devices are identical to the basic parts except for the maximum allowable load-current rating.
For maximum power-handling capability, all drivers are supplied in a 12-pin single in-line power-tab package. The tab needs no insula-tion. External heat sinks are usually required for proper operation of these devices.
Output Currents to 4 A Output Voltages to 80 V Loads to 1280 W TTL, DTL, or CMOS Compatible Inputs Internal Clamp Diodes Plastic Single In-Line Package Heat-Sink Tab
2879 General Description
These quad Darlington arrays are designed to serve as interface between low-level logic and peripheral power devices such as sole-noids, motors, incandescent displays, heaters, and similar loads of up to 320 W per channel. Both integrated circuits include transient-suppres- sion diodes that enable usewith inductive loads. The input logic is compatible with most TTL, DTL, LSTTL, and 5 V CMOS logic.
Type UDN2878W and UDN2879W 4 A arrays are identical excep for output-voltage ratings. The former is rated for operation to 50 V(35 V sustaining), while the latter has a minimum output breakdown rating of 80 V (50 V sustaining). The lower-cost UDN2879W-2 is recommended for applications requiring load currents of 3 A or less. These less expensive devices are identical to the basic parts except for the maximum allowable load-current rating.
For maximum power-handling capability, all drivers are supplied in a 12-pin single in-line power-tab package. The tab needs no insula-tion. External heat sinks are usually required for proper operation of these devices.
Output Currents to 4 A Output Voltages to 80 V Loads to 1280 W TTL, DTL, or CMOS Compatible Inputs Internal Clamp Diodes Plastic Single In-Line Package Heat-Sink Tab