Features: • 8M / 16M / 32M-bit Serial Flash Memories• Family of Serial Flash Memories W25P80: 8M-bit/1M-byte (1,048,576) W25P16: 16M-bit/2M-byte (2,097,152) 256-bytes per programmable page Compatible 1M/2M/4M-bit devices• 4-pin SPI Serial Interface Clock, Chip Select, Data In, Da...
W25P16: Features: • 8M / 16M / 32M-bit Serial Flash Memories• Family of Serial Flash Memories W25P80: 8M-bit/1M-byte (1,048,576) W25P16: 16M-bit/2M-byte (2,097,152) 256-bytes per programmable pa...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
PARAMETERS | SYMBOL | CONDITIONS | RANGE | UNIT |
Supply Voltage | VCC | 0.6 to +4.0 | V | |
Voltage Applied to Any Pin | VIO | Relative to Ground | 0.6 to VCC +0.4 | V |
Storage Temperature | TSTG | 65 to +150 | ||
Lead Temperature | TLEAD | See Note 2 | ||
Electrostatic Discharge Voltage | VESD | Human Body Model(3) | 2000 to +2000 | V |
Notes:
1. This device has been designed and tested for the specified operation ranges. Proper operation outside of these levels is not guaranteed. Exposure beyond absolute maximum ratings (listed above) may cause permanent damage.
2. Compliant with JEDEC Standard J-STD-20C for small body Sn-Pb or Pb-free (Green) assembly and the European directive
on restrictions on hazardous substances (RoHS) 2002/95/EU.
3. JEDEC Std JESD22-A114A (C1=100 pF, R1=1500 ohms, R2=500 ohms).
The W25P80 (8M-bit) and W25P16 (16M-bit) Serial Flash memories provide a storage solution for systems with limited space, pins and power. They are ideal for code download applications as well as storing voice, text and data. The devices operate on a single 2.7V to 3.6V power supply with current consumption as low as 4mA active and 1A for power-down. Devices are offered in space-saving SOIC packages. As part of a family of Serial Flash products, Winbond also offers compatible devices in 1M/2M/4M-bit densities.
The W25P16 array is organized into 4,096/8,192 programmable pages of 256-bytes each. Up to 256 bytes can be programmed at a time using the Page Program instruction. Pages are grouped into 16/32 erasable sectors of 256 pages (64K-byte) each as shown in figure 2. Both Sector Erase and Chip (full chip) Erase instructions are supported. Additionally, a 256-byte Parameter Page is provided for user data that is typically stored in EEPROMs such as ID or revision numbers and configuration parameters. The parameter page is separate from the main array allowing for much faster erase times.
The Serial Peripheral Interface (SPI) consists of four pins (Serial Clock, Chip Select, Serial Data In and Serial Data Out) that support high speed serial data transfers up to 50MHz. A Hold pin, Write Protect pin and programmable write protect features provide further control flexibility. Additionally, the device can be queried for manufacturer and device type.
The Winbond W25P16 are fully compatible with the previous NexFlash NX25P80/16 Serial Flash memories.