Features: · Two protected I/O lines
· VCC regulation (5 V ±4%, 100 mA max. with controlled rise and fall times)
· VPP generation (12.5, 15 or 21 V ±2.5%, 50 mA max. programmable by two bits, with controlled rise and fall times)
· Clock generation (up to 8 MHz)
· Short-circuit, thermal and card extraction protections
· Two voltage supervisors (digital and analog supplies)
· Automatic activation and deactivation sequences via an independent internal clock
· Enhanced ESD protections on card connections (4 kV min.)
· ISO 7816 approval.
Application· Pay TV
· Telematics
· Cashless payment
· Multipurpose card-readers, etc.Pinout
Specifications
| SYMBOL |
PARAMETER |
CONDITIONS |
MIN. |
MAX. |
UNIT |
| VDD |
supply voltage |
|
-0.3 |
-18 |
V |
| Vx1 |
voltage on pins PSEL1, PSEL2, PRES,
PRES, WRITE, START, OFF,
ALARM and RSTIN |
|
-0.3 |
VDD |
V |
| VH |
voltage on pin VH |
|
-0.3 |
+30 |
V |
| VPP |
voltage on pin VPP |
|
-0.3 |
VH |
V |
| VSUP |
voltage on pin VSUP |
|
-0.3 |
+12 |
V |
| Vx2 |
voltage on pins ALARM and DELAY |
|
-0.3 |
VSUP |
V |
| Vx3 |
voltage on pins XTAL, I/O1(mC), I/O2(mC),
CLKIN, CLKOUT, CLKDIV and CVNC |
|
-0.3 |
+6.0 |
V |
| Vx4 |
voltage on pins I/O1, I/O2, RST,
CLK and VCC |
duration < 1 ms |
-0.3 |
+7.0 |
V |
| Ptot |
continuous total power dissipation |
TDA8000; Tamb = +70 ;
note 1; see Fig.10 |
- |
2 |
W |
|
TDA8000T; Tamb = +70 ;
note 1; see Fig.11 |
- |
0.92 |
W |
| Tstg |
storage temperature |
|
-55 |
+150 |
|
| Ves |
electrostatic voltage on pins I/O1, I/O2, VCC,
VPP, RST and CLK |
|
-4 |
+4 |
kV |
|
electrostatic voltage on other pins |
|
-2 |
+2 |
kV |
Note
1. Ptot = VDD ´ (IDD(unloaded) + åIsignals) + ICC ´ (VDD - VCC) + max.{(VH - VPP) ´ IPP(read) + (VH - VPP) ´ IPP(write)}
+ VH ´ IH(unloaded) + VSUP ´ ISUP + (VDD - CVNC) ´ ICVNC.
Where 'signals' means all signal pins used, excluding the supply pins.
DescriptionThe TDA8000T is a complete, low-cost analog interface which can be positioned between a smart card or a memory card (ISO 7816) and a microcontroller. It is approved for banking, telecom and pay TV applications.
The complete supply, protection and control functions are realized with only a few external components, which makes the TDA8000T very attractive for consumer applications. Application suggestions and support is available on request (see examples in Chapter "Application information").
TDA8000T Data Sheet
