Features: · Two protected I/O lines· VCC regulation (5 V ±4%, 100 mA max. with controlled rise and fall times)· VPP generation (12.5, 15 or 21 V ±2.5%, 50 mA max. programmable by two bits, with controlled rise and fall times)· Clock generation (up to 8 MHz)· Short-circuit, thermal and card extract...
TDA8000: Features: · Two protected I/O lines· VCC regulation (5 V ±4%, 100 mA max. with controlled rise and fall times)· VPP generation (12.5, 15 or 21 V ±2.5%, 50 mA max. programmable by two bits, with cont...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
· Two protected I/O lines
· VCC regulation (5 V ±4%, 100 mA max. with controlled rise and fall times)
· VPP generation (12.5, 15 or 21 V ±2.5%, 50 mA max. programmable by two bits, with controlled rise and fall times)
· Clock generation (up to 8 MHz)
· Short-circuit, thermal and card extraction protections
· Two voltage supervisors (digital and analog supplies)
· Automatic activation and deactivation sequences via an independent internal clock
· Enhanced ESD protections on card connections (4 kV min.)
· ISO 7816 approval.
SYMBOL | PARAMETER | CONDITIONS | MIN. | MAX. | UNIT |
VDD | supply voltage | -0.3 | -18 | V | |
Vx1 | voltage on pins PSEL1, PSEL2, PRES, PRES, WRITE, START, OFF, ALARM and RSTIN |
-0.3 | VDD | V | |
VH | voltage on pin VH | -0.3 | +30 | V | |
VPP | voltage on pin VPP | -0.3 | VH | V | |
VSUP | voltage on pin VSUP | -0.3 | +12 | V | |
Vx2 | voltage on pins ALARM and DELAY | -0.3 | VSUP | V | |
Vx3 | voltage on pins XTAL, I/O1(mC), I/O2(mC), CLKIN, CLKOUT, CLKDIV and CVNC |
-0.3 | +6.0 | V | |
Vx4 | voltage on pins I/O1, I/O2, RST, CLK and VCC |
duration < 1 ms | -0.3 | +7.0 | V |
Ptot | continuous total power dissipation | TDA8000; Tamb = +70 ; note 1; see Fig.10 |
- | 2 | W |
TDA8000T; Tamb = +70 ; note 1; see Fig.11 |
- | 0.92 | W | ||
Tstg | storage temperature | -55 | +150 | ||
Ves | electrostatic voltage on pins I/O1, I/O2, VCC, VPP, RST and CLK |
-4 | +4 | kV | |
electrostatic voltage on other pins | -2 | +2 | kV |
Note
1. Ptot = VDD ´ (IDD(unloaded) + åIsignals) + ICC ´ (VDD - VCC) + max.{(VH - VPP) ´ IPP(read) + (VH - VPP) ´ IPP(write)}
+ VH ´ IH(unloaded) + VSUP ´ ISUP + (VDD - CVNC) ´ ICVNC.
Where 'signals' means all signal pins used, excluding the supply pins.
The TDA8000 is a complete, low-cost analog interface which can be positioned between a smart card or a memory card (ISO 7816) and a microcontroller. It is approved for banking, telecom and pay TV applications.
The complete supply, protection and control functions are realized with only a few external components, which makes the TDA8000 very attractive for consumer applications. Application suggestions and support is available on request (see examples in Chapter "Application information").