Position: Home  > All Categories> Integrated Circuits (ICs) > ZXLD1352

ZXLD1352

Features: • Simple low parts count• Internal 30V NDMOS switch• 350mA output current• Single pin on/off and brightness control using DC voltage or PWM• 1000:1 PWM dimming range• Soft-start• High efficiency (up to 95%(*))• Wide input voltage range: 7V ...

product image

ZXLD1352 Picture
See larger image
SeekIC No. : 004552410 Detail

ZXLD1352: Features: • Simple low parts count• Internal 30V NDMOS switch• 350mA output current• Single pin on/off and brightness control using DC voltage or PWM• 1000:1 PWM dimmin...

ZXLD1352 Data Sheet

floor Price/Ceiling Price

Get Latest Price
Part Number:
ZXLD1352
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/11/23

add to my favourite

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

• Simple low parts count
• Internal 30V NDMOS switch
• 350mA output current
• Single pin on/off and brightness control using DC voltage or PWM
• 1000:1 PWM dimming range
• Soft-start
• High efficiency (up to 95%(*))
• Wide input voltage range: 7V to 30V
• 40V transient capability
• Output shutdown
• Up to 1MHz switching frequency
• Inherent open-circuit LED protection
• Typical 4% output current accuracy
(*) Using standard external components as specified under electrical characteristics. Efficiency is dependent upon the
number of LEDs driven and on external component types and values.




Application

• Low voltage halogen replacement LEDs
• Automotive lighting
• Low voltage industrial lighting
• LED back-up lighting
• Illuminated signs




Pinout

Connection Diagram




Specifications

Part Number ZXLD1352
Min.- Max. Input Voltage (V) 7 ~ 30
Output Voltage (V) 30
Typ Peak Output Current (A) 0.35
Max Output Current (mA) -
LED Current Accuracy (%) 5
Frequency (kHz) typ 1000
Efficiency (%) 97
Operating Temperature (C) -40 to +105
Quiescent Current (mA) typ -
Standby Quiescent Current (uA) typ 20


Input voltage (VIN) ...................................-0.3V to +30V (40V for 0.5 sec)
ISENSE voltage (VSENSE) .......+0.3V to -5V (measured with respect to VIN)
LX output voltage (VLX) .............................-0.3V to +30V (40V for 0.5 sec)
Adjust pin input voltage (VADJ) ..............................................-0.3V to +6V
Switch output current (ILX)............................................................. 500mA
Power dissipation (Ptot)..................................................................450mW
(Refer to package thermal de-rating curve on page 18)
Operating temperature (TOP) .................................................-40 to 105
Storage temperature (TST)..................................................... -55 to 150
Junction temperature (Tj MAX)............................................................ 150

These are stress ratings only. Operation above the absolute maximum rating may cause device failure. Operation at
the absolute maximum ratings, for extended periods, may reduce device reliability.




Description

The ZXLD1352 is a continuous mode inductive step-down converter, designed for driving single or multiple series connected LEDs efficiently from a voltage source higher than the LED voltage. The device operates from an input supply between 7V and 30V and provides an externally adjustable output currentof up to 350mA. Depending upon supply voltage and external components, this can provide up to 8 watts of output power.

The ZXLD1352 includes the output switch and a high-side output current sensing circuit, which uses an external resistor to set the nominal average output current.

Output current can be adjusted above, or below the set value, by applying an external control signal to the 'ADJ' pin.

The ADJ pin will accept either a DC voltage or a PWM waveform. DC voltages between 0.3V and 2.5V allow adjustment of output current from 25% to 200% of nominal. 1000:1 adjustment of output current is possible using PWM control.

Applying a voltage of 0.2V or lower to the ADJ pin turns the output off and switches the device into a low current standby state.

The device is assembled in a TSOT23-5 pin package.






Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
You may also be interested in :
Crystals and Oscillators
WT325BI0030.000000
2SB49
Tools
TCP202
G084SN05 V.3
Motors, Solenoids, Driver Boards/Modules
IHSS57-36-20
ASD-B2-1521-B
Boxes, Enclosures, Racks
ACLSN12
ACLJIC
Optical Inspection Equipment
AA924
A21K4B
Cable Assemblies
CS1W-CN114
XW2Z-500T
View more