Features: • 1mm height profile TSOT23-5 pin package• Internal PWM filter for flicker free output• High efficiency (80% typ)• Wide input voltage range: 2.5V to 5.5V• Up to 50mA output current• Low quiescent current: (60A typ)• 500nA maximum shutdown curren...
ZXLD1101: Features: • 1mm height profile TSOT23-5 pin package• Internal PWM filter for flicker free output• High efficiency (80% typ)• Wide input voltage range: 2.5V to 5.5V• Up ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Part Number | ZXLD1101 |
Min and Max Input Voltage (V) | 2.5 ~ 5.5 |
Output Voltage (V) | ADJ 28V Max |
Frequency (kHz) typ | 1000 |
Efficiency (%) | 80 |
Quiescent Current (mA) typ | - |
Standby Quiescent Current (uA) typ | 60 |
PARAMETER | SYMBOL | LIMIT | UNIT | |
Input voltage | (VIN) | 7 | V | |
LX output voltage | (VLX) | 30 | V | |
Switch output current | (ILX) | 500 | mA | |
Power dissipation | (PD) | 300 | mW | |
Operating temperature | (TOP) | -40 to 85 | ||
Storage temperature | (TST) | -55 to 150 | ||
Junction temperature | (Tj MAX) | 125 |
The ZXLD1101 is a PFM inductive boost converter designed for driving 2, 3 or 4 series connected white LEDs from a Li-Ion cell and up to 8 LEDs from a 5V supply. The device operates from an input supply of between 2.5V and 5.5V and provides an adjustable current of up to 50mA.
The ZXLD1101 includes the output switch and peak current sense resistor, and can operate with a maximum output voltage of 28V.
Quiescent current is typically 60A and a shutdown function is provided to reduce this current to less than 500nA in the 'off' state.
Output current can be adjusted by applying a PWM control signal to the 'Enable' pin. Depending upon the control frequency, this will provide either a continuous or a 'chopped' output current. The PWM filter components are contained within the chip.
The device is assembled in the TSOT23-5 pin package with 1mm maximum height profile.