Features: • Accurate down to end current sensing• Output voltage scaling x10• 0 to VCC-2V sense input range• 2.7 to 20V supply range• 50A quiescent current• SOT23-5 packageApplication• Power supply• DC motor and solenoid control• Battery manage...
ZXCT1050: Features: • Accurate down to end current sensing• Output voltage scaling x10• 0 to VCC-2V sense input range• 2.7 to 20V supply range• 50A quiescent current• SOT23...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $.29 - .65 / Piece
Current & Power Monitors & Regulators Automotive Tem Range
Part Number | ZXCT1050 |
Accuracy @ Vsense =100mV % | 0.03 |
Bandwidth (typ) (MHz) | 0.8 |
Description | Wide common mode current monitor |
Gain Output/Vsense | Programmable |
IS- S- Input Current (nA) | 150 |
Operating Ambient Temp Range (°C) | -40 to +125 |
Quiescent Current (uA) | 50 |
Release Date | |
S+ Common-mode sense voltage range (V) | 0 ~ VCC-2 |
Sense Voltage (Vmax) | 500mV |
Special Features | Separate Vcc pin + current gain (x20) + Short Circuit protection |
Type | Current output |
VCC/VB Supply Voltage Range (V) | 2.7 ~ 20 |
VCC max.20V
Voltage on SENSE- and SENSE+-0.6 to VCC
Voltage on all other pins-0.6V and VCC +0.6V
VSENSE = '(VSENSE+) - (VSENSE-)' 500mV
Operating temperature-40 to 125
Storage temperature-55 to 150
Maximum junction temperature150
Package power dissipation300mW* at TA = 25 (De-rate to zero for TJ = 150)
Operation above the absolute maximum rating may cause device failure. Operation at the absolute maximum ratings, for extended periods, may reduce device reliability.
The ZXCT1050 is a wide input range current monitor, which operates over a range of input voltages from ground up to VCC-2V. As a result the ZXCT1050 can be used on the high or low side of the load.
The ZXCT1050 provides variable gain by using two external resistors. The first of which sets the transconductance and the second setting the overall gain.
The very low offset voltage enables a typical accuracy of 1% for sense voltages of only 30mV,
giving better tolerances for small sense resistors necessary at higher currents.