XE1014

Xecom's XE1014 is an FCC part 68 compliant telephone interface which meets the technical requirements for V.34 data transfer. The XE1014 includes ring detect and off hook control circuitry for network access and provides 1500 volts isolation from the telephone network as required by FCC part 68 rules. The XE1014 is pin compatible with Xecom's XE1000 international telephone interface. The XE1000 has V.34 capability as well.

The XE1014 has its own characteristics. Here lists some of its important features. The first one is: compatible with V.34 data transfer (28,800 bps). The second one is: FCC part 68 compliant. The third one is: Canadian DOC compliant. The fourth one is: 1500 volts RMS isolation. The fifth one is: compact size (1.05"*1.25"*0.40"). The sixth one is: low power (typical on-line; +5 volts 5mA).The seventh one is: PSTN and PBX compatible. The eighth one is: ring detection. And the last one is: hookswitch control.

The XE1014 has some telephone line interface specifications. The type value of telephone line impedance match is 600ohms, the minimum of ring detect sensitivity is 38 Vrms, and the type value of the telephone line holding current is 20mA, while the maximum is 120mA and the minimum is 10mA.

Next are the characteristics of power supply of the XE1014. Its has three parameters. The  supply voltage is between 4.5 and 5.5 V, and the type value is 5.0V. The supply current's type value is 5.0mA, and its maximum is 10.0mA.

At present there is not too much information about this model. If you are willing to find more about the XE1014, please pay attention to our web! We will promptly update the relevant  information. For more information about the XE1014, please pay attention to our web, the web site is www.ChinaICMart.com or www.seekic.com.