XE0024V

The XE0024V provides a low-cast FCC Part 68 compliant phone line interface. It is designed to meet Part 68 hazardous voltage, surge and leakage current specifications. Line access is controlled via the ring indication output and off-hook relay control. The XE0024V operates from a single +5 volts power supply and occupies just 1.25 square inches of board space. The XE0024V is designed to meet the requirement of voice grade applications including voice, DTMF, and low-speed data transmission as well as the needs of applications requiring greater bandwidth such as V.32 and V.32 bis modems.

The XE0024V has its own characteristics. Here lists some of its important features. The first one is: small size 1.25"*1.0"*0.42". The second one is: FCC Part 68 compliant. The third one is: ring detection. The fourth one is: single +5V operation. The fifth one is: 1500 volt isolation. The sixth one is: 800 volt surge protection. The seventh one is: hookswitch control. And the last one is: broad bandwidth operation.

Next are some electrical specification of the XE0024V. The type value of power supply current is 1.0mA, and its maximum is 1.5mA. The transmit insertion loss at 1000hz, its type value is 1.0 dB, and the receive insertion loss at 1000hz, its type value is also 1.0 dB. The ring detect sensitivity (on-hook) is 38 Vrms. The coupler match input impedance is 590 Ohms. The minimum of the ring detect peak current is 100 nA, and the maximum of the ring detect idle current is 50nA.

At present there is not too much information about this model. If you are willing to find more about the XE0024V, please pay attention to our web! We will promptly update the relevant  information. For more information about the XE0024V., please pay attention to our web, the web site is www.ChinaICMart.com or www.seekic.com.