XE0006

The XE0006 data access arrangement provides a "direct connect" telephone line interface. It is FCC part 68 type WP registered to meet hazardous voltage, surge and leakage current specifications. This component may be used as the direct connect telephone line interface for virtually any application in which voice or data is to be transmitted over the public switched telephone network. The XE0006 provides high voltage isolation, independent on/off hook control and ring detection circuitry for use in telephony applications. It operates from a single +5 volt power supply and occupies 1.25 square inches of board space. The wide band-width transformer internal to the XE0006 is designed for use in high speed applications, such as a CCITT V.32 modem. This DAA is pin compatible with the XE0004, for easy upgrading of existing designs.

The XE0006 has its own characteristics. Here lists some of its important features. The first one is: small size 1.25"*1.0"*0.5". The second one is: user transferable FCC part 68 registration. The third one is: ring detection and hookswitch control. The fourth one is: single +5V operation. The fifth one is: 1500 volt isolation. The sixth one is: 800volt surge protection. The seventh one is: wide band-width transformer. And the last one is: for use with dial-up, PBX and leased lines.

The XE0006 has some telephone line interface specifications. The type value of telephone line impedance match is 600ohms, the minimum of ring detect sensitivity is 38 Vrms, and the minimum of the telephone line holding current is 20mA, while the maximum is 100mA and the minimum is 0mA.

At present there is not too much information about this model. If you are willing to find more about the XE0006, please pay attention to our web! We will promptly update the relevant  information. For more information about the XE0006, please pay attention to our web, the web site is www.ChinaICMart.com or www.seekic.com.