Features: Maximum : More than 150mA (Up to 200mA) Output Current (VIN=VOUT(T)+3.0V)Dropout Voltage : 300mV@IOUT=20mAInput Voltage Range : 2.0V~25.0VOutput Voltage : 2.0V~12.0V (100mV increments)Setting Range (With external resistors:2.0V~23.0V)High Accuracy : Setting Voltage Accuracy±2% (Setting V...
XC6216/XE6216: Features: Maximum : More than 150mA (Up to 200mA) Output Current (VIN=VOUT(T)+3.0V)Dropout Voltage : 300mV@IOUT=20mAInput Voltage Range : 2.0V~25.0VOutput Voltage : 2.0V~12.0V (100mV increments)Sett...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
DescriptionThe XC6201P132 is designed as one member of the XC6201 series which are highly precise,...
PARAMETER | SYMBOL | RATINGS | UNIT | |
Input Voltage | VIN | VSS-0.3~30 | V | |
Output Current | IOUT | 300 (*1) | mA | |
Output Voltage | VOUT | VSS-0.3~VIN+0.3 | V | |
CE Input Voltage | VCE | VSS-0.3~VIN+0.3 | V | |
FB Voltage | VOFB | VSS-0.3~30 | V | |
Power Dissipation | SOT-25 | Pd | 250 | mW (TJ=25) |
SOT-89 | 500 | |||
SOT-89-5 | 500 | |||
USP-6C | 100 (1100 *2) | |||
SOT-223 | 300 (1900 *2) | |||
TO-252 | T.B.D. (*3) | |||
Operating Temperature Range | Topr | -40~+85 | ||
Storage Temperature Range | Tstg | -55~+125 |
XC6216/XE6216 series are highly precise, low noise, positive regulator ICs. The series consists of a voltage reference, an error amplifier, a current limiter, a thermal shutdown circuit and a phase compensation circuit plus a driver transistor.
The output voltage of XC6216/XE6216 is selectable in 100mV increments within the range of 2.0V to 12V using laser trimming technologies (XC6216B/XE6216B series). Furthermore, with external resistors, the output voltage can be set from 2.0V to 23V (XC6216C/XE6216E series). The series' output stabilization capacitor (CL) is also compatible with low ESR ceramic capacitors.
The over current protection circuit and the thermal shutdown circuit of XC6216/XE6216 are built-in. These two protection circuits will operate when the output current reaches current limit level or the junction temperature reaches temperature limit level.The CE function enables the output to be turned off and the IC becomes a stand-by mode resulting in greatly reduced power consumption.